Skip Navigation
menu close modal

All Resources

Mission Animation: ECM Boom Deployment (Close)

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.

See more animations here.

Related content pages

Related

Europa Clipper’s 28-foot (8.5-meter) magnetometer boom is deployed at NASA’s Jet Propulsion Laboratory.
More
Seven workers in white lab coats, cleanroom bouffant caps, and blue face masks stand near Europa Clipper’s magnetometer boom after the boom was unfurled. The boom is covered in protective silver-colored material and is supported by several aluminum-colored stands.
The Europa Clipper Magnetometer Boom Deployed
An engineer prepares to integrate the SUrface Dust Analyzer (SUDA)'s sensor head with an ion detector at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulde...
More
An image showing an engineer prepares to integrate the SUrface Dust Analyzer (SUDA)'s sensor head with an ion detector at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. The sensor head will detect and determine the mass of ion molecules generated by impacting dust particles.
Dust Analyzer Sensor Head Integration
Thermal imager bolted to frame.
More
Instrument bolted to frame used for handling.
Thermal Imager
An engineer testing the SUrface Dust Analyzer (SUDA) electronic box next to the partially assembled instrument in the cleanroom at the Laboratory for Atmospheric and Space Physics (LASP) at the Uni...
More
An image showing an engineer testing the SUrface Dust Analyzer (SUDA) electronic box next to the partially assembled instrument in the cleanroom at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder.
Dust Analyzer Electronics Testing
Technicians offload NASA's Europa Clipper from a U.S. Air Force transport aircraft at Kennedy Space Center on May 23, 2024.
More
The back of a green transport aircraft is open like a giant duck's bill, and the shipping container hold Europa Clipper can be seen sitting inside. A ramp extends from the back of the plane. Workers are giving hand signals as they guide the shipping container off the plane.
Europa Clipper Arrives in Florida
Europa Clipper project scientist Robert Pappalardo presents the Monolith Award to Karla Clark.
More
Europa Clipper project scientist on right presents a black, rectangle-shaped award to Karla Clark, a woman standing on the left.
Europa Clipper Monolith Award
 The main body of NASA’s Europa Clipper spacecraft has been delivered to the agency’s Jet Propulsion Laboratory in Southern California, where assembly, test, and launch operations are underway.
More
A time lapse video showing a container arriving to JPL and then being opened to reveal the main body of the spacecraft.
Main Body of NASA's Europa Clipper Spacecraft Arrives at JPL from APL
A 3D model of the MAss Spectrometer for Planetary EXploration/Europa (MASPEX), a chemical analysis instrument on Europa Clipper.
More
3d model of maspex instrument
MASPEX
Backup flight-ready ion detectors for the SUrface Dust Analyzer (SUDA) are stored in a dry nitrogen environment to protect these highly sensitive instruments from degradation due to contamination o...
More
An image showing that backup flight-ready ion detectors for the SUrface Dust Analyzer (SUDA) are stored in a dry nitrogen environment to protect these highly sensitive instruments from degradation due to contamination or moisture in the air.
Backup Flight-Ready Dust Analyzer Ion Detectors
The propulsion module harness, installed onto a bake-out fixture, is rolled up to the propulsion module in preparation for transfer and installation. The harness is the cabling that connects all of...
More
people working on the spacecraft in the clean room
Europa Clipper Propulsion Module
When it launches in October, NASA's Europa Clipper will carry a richly layered dispatch that includes more than 2.6 million names submitted by the public.
More
Video explaining Europa Clipper's special vault plate design.
NASA's Design for Message Heading to Jupiter's Moon Europa
Engineers stand next to Europa Clipper's wide-angle camera in a clean room at NASA's Jet Propulsion Laboratory, following its delivery in June 2022. 
More
Eleven engineers wearing full white coveralls and masks stand around a metallic table in a clean room. Europa Clipper's wide-angle camera rests on the metallic table. Several engineers are giving a thumbs up hand gesture, indicating that the instrument has successfully undergone functional tests following its delivery to JPL.
Europa Imaging System Wide-Angle Camera Delivered to JPL
Dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants
More
An image showing that dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants.
Dust Analyzer in the Clean Room
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
The scanning mirror and data processing unit of Europa Clipper’s imaging spectrometer instrument.
More
The scanning mirror and data processing unit of Europa Clipper’s imaging spectrometer instrument, called MISE, are critical to determining the habitability of the ocean that likely resides beneath Europa’s surface.
Imaging Spectrometer's Scanning Mirror and Data Processing Unit
Europa Clipper's high-gain antenna is installed on Aug. 14, 2023.
More
Europa Clipper's high gain antenna, which is taller than the nearby workers, is covered in a protective shroud as it sits on a platform at NASA's Jet Propulsion Laboratory.
Powerful Antenna Installed On Europa Clipper
This mosaic of a region in the northern hemisphere of Jupiter's moon, Europa, displays many of the features which are typical on the satellite's icy surface.
More
color view of ridges and other terrain on an icy surface
Double Ridges, Dark Spots, and Smooth Icy Plains on Europa
A 3D model of Gravity/Radio Science, a radar & gravity instrument on Europa Clipper.
More
3d model of the Gravity/Radio Science instruments
Gravity/Radio Science
Marc Miller, a mechanical assembly technician at the University of Colorado Boulder Laboratory for Atmospheric and Space Physics (LASP), gauges the depth of ceramic pins installed in the SUrface Du...
More
Marc Miller, a mechanical assembly technician at the University of Colorado Boulder Laboratory for Atmospheric and Space Physics (LASP), gauges the depth of ceramic pins installed in the SUrface Dust Analyzer (SUDA) instrument.
SUDA Assembly
Europa Clipper’s dust analyzer shown in a clean room.
More
The gold colored SUDA sensor head is shown resting on a table in a clean room, seen in the center left of this image. The cover to the sensor head is closed, and to the right a small, silver electronics box is visible. Combined, the pieces make up the entire SUDA instrument. The background space in the clean room is lit up purple.
Europa Clipper's Dust Analyzer
A 3D model of the SUrface Dust Analyzer (SUDA), a chemical analysis instrument on Europa Clipper.
More
3d model of the suda instrument
SUDA
The ultraviolet spectrograph will collect ultraviolet light and create images to help determine the composition of Europa’s atmospheric gases and surface materials
More
The ultraviolet spectrograph will collect ultraviolet light and create images to help determine the composition of Europa’s atmospheric gases and surface materials
Europa Clipper's Ultraviolet Spectrograph
An engineering model of the focal plane module for Europa Clipper’s E-THEMIS instrument. 
More
close-up view of the focal plane module of E-THEMIS
Europa Clipper E-THEMIS Thermal Camera Focal Plane Module
The bake-out fixture is modified in preparation for the transfer and installation of the harness onto the propulsion module structure. The harness is the cabling that connects all of the electronic...
More
people wearing clean room attire work on the spacecraft's electrical system
Europa Clipper Propulsion Module
The vault plate is installed on NASA's Europa Clipper spacecraft on May 3, 2024.
More
The triangular-shaped, silver-colored vault plate can be seen attached to the Europa Clipper spacecraft. Two metal bars cross in front of the plate. Several screws can be seen holding the plate to the spacecraft. Orange colored wires run alongside the other equipment on the spacecraft.
Europa Clipper Vault Plate Installed