Skip Navigation
CLIPPER CAM
icon/broadcasting LIVE
menu close modal

All Resources

Europa Clipper Downloadable 3D Model

A 3D model of Europa Clipper available for download. Updated in January 2022.

Related

Europa Clipper’s mass spectrometer was delivered to JPL in December 2022.
More
A group of eleven engineers wearing full-body white protective clothing stand facing the camera in a cleanroom. All of the engineers are giving a thumbs up hand expression. In the middle of the group of engineers is a large transparent box, approximately five feet tall, two feet wide, and two feet deep. Inside the transparent box is the mass spectrometer. Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure.
Europa Clipper's Mass Spectrometer Delivered to JPL
Engineers test components for Europa Clipper’s radar instrument.
More
Engineers test components for Europa Clipper’s radar instrument.
Radar Test Time-Lapse
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments. 
More
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments.
Mission Animation: Spacecraft 360 with Instruments
Engineers removing Europa Clipper's propulsion module from its shipping container.
More
Engineers removing Europa Clipper's propulsion module from its shipping container
Europa Clipper Propulsion Module
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following delivery.
More
An engineer’s gloved hand on the casing holding the thermal imager instrument, located on a table in a clean room, preparing it for functional testing.
Thermal Imager Delivered to JPL
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
An identical copy of Europa Clipper's propulsion module and electronics vault is lowered by crane in a static test tower.
More
NASA/JPL-Caltech
Europa Clipper's Developmental Test Model
An engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulde...
More
An image showing an engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. SUDA is extremely sensitive and will be able to detect amino acids in concentrations as low as one part per million within water ice.
Dust Analyzer Ion Detector
Engineers and technicians work together to install reaction wheels on the underside of the main body of NASA’s Europa Clipper spacecraft, which is in its assembly, test, and launch operations phase...
More
The main body of the spacecraft standing in a white clean room is the central component of this image. The tall structure is covered with protective covers to keep sensitive equipment safe during assembly and what looks like white paper, which is being used for patterning for the spacecraft’s protective insulation. Four engineers are seen under the base of the spacecraft, where they are installing the reaction wheels, as if they are working on the undercarriage of a car. Two engineers on the left are on their stomachs, and two engineers on the right are on their back.
NASA's Europa Clipper: Reaction Wheel Installation
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
Engineers integrate the avionics vault mass simulator for the Europa Clipper avionics module to the top of the propulsion module.
More
Engineers integrate the avionics vault mass simulator for the Europa Clipper avionics module to the top of the propulsion module.
Avionics Mass Simulator
Mihaela Ballarotto samples Europa Clipper's propulsion module for planetary protection cleanliness prior to harness installation. 
More
sampling of the propulsion module in the clean room
Europa Clipper Propulsion Module
Engineers test a prototype of one of Europa Clipper’s radar antennas in 2018 on a hilltop at NASA’s Jet Propulsion Laboratory. 
More
engineers working on a spacecraft instrument at JPL
Europa Clipper REASON Radar Antenna Test JPL
Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Ultraviolet Spectrograph Delivered to JPL
Europa Clipper’s dust analyzer shown in a clean room.
More
The gold colored SUDA sensor head is shown resting on a table in a clean room, seen in the center left of this image. The cover to the sensor head is closed, and to the right a small, silver electronics box is visible. Combined, the pieces make up the entire SUDA instrument. The background space in the clean room is lit up purple.
Europa Clipper's Dust Analyzer
A 3D model of Europa Clipper’s Ultraviolet Spectrograph (Europa-UVS), a spectrometry instrument on Europa Clipper.
More
3D model of the europa-uvs instrument
Europa-UVS
Engineers inspect Europa Clipper's plasma detection instrument. 
More
An engineer examines a faraday cup, part of Europa Clipper's plasma detection instrument, which is resting on a table in a clean room. The engineer is using a flash light to examine the instrument.
Plasma Detection Instrument Delivered to JPL
Solar array “wings” for NASA’s Europa Clipper in the cleanroom of Airbus in Leiden, the Netherlands.
More
The spacecraft’s large solar array wings take up the majority of this image. They are parallel to each other in position and the image is taken at angle, so you can see the solar arrays extended into the background of the image. Each solar array wing consists of five panels connected to each other to form a long solar array wing that is approximately 46.5 feet (14.2 meters) long. Bronze colored lines are visible creating a grid pattern on each panel. Each solar array wing is hoisted several feet above the ground by support structures that attach to each solar array wing panel. The solar array wings are tall with an approximate height of 13.5 feet (4.1 meters). Walking between the solar array wings is an engineer wearing blue protective clothing. The engineer doesn’t even appear to come up to half the height of the solar array wings. The solar array wings are visible in a large white cleanroom, and the area with the wings is cordoned off with a red barrier.
NASA Europa Clipper Solar Arrays Assembly
Engineers install 2-foot-wide reaction wheels onto the main body of NASA’s Europa Clipper spacecraft at the agency’s Jet Propulsion Laboratory. The orbiter is in its assembly, test, and launch oper...
More
Two engineers in white body coveralls, gloves, and masks are seen framing the image, with one engineer facing towards the camera on the left and one facing away from the camera on the right. They are seen holding a black, two-foot-wide circular reaction wheel, which is in the center of the image. The engineers are installing the reaction wheel to the main body of the spacecraft, which is visible looming above the engineers and the reaction wheel. To the back right of the reaction wheel that is being installed, another reaction wheel that has already been installed is visible.
NASA's Europa Clipper Gets Its Reaction Wheels
Engineers and technicians in a clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium pressurant onto the propulsion module of NASA’s ...
More
Engineers and technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium onto the propulsion module of NASA's Europa Clipper spacecraft.
Europa Clipper Propulsion Module: Integration Underway
Europa Clipper’s power control and distribution assembly is lowered into the spacecraft’s electronics vault. 
More
In a sterile white room, five people wearing white full-body coveralls, gloves, and masks monitor a metal box about the size of a microwave oven as a crane lowers the box in to a larger hollow metal box about six feet wide.
Power Control and Distribution Assembly Integration
Engineers stand next to Europa Clipper's wide-angle camera in a clean room at NASA's Jet Propulsion Laboratory, following its delivery in June 2022. 
More
Eleven engineers wearing full white coveralls and masks stand around a metallic table in a clean room. Europa Clipper's wide-angle camera rests on the metallic table. Several engineers are giving a thumbs up hand gesture, indicating that the instrument has successfully undergone functional tests following its delivery to JPL.
Europa Imaging System Wide-Angle Camera Delivered to JPL
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
An animation showing a boom extending from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Distance)
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
More
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
Ultraviolet Spectrograph Shipment Preparations
In this time-lapse video, engineers test components for Europa Clipper’s radar instrument in 2018 at a testing range — “the Mesa” — at NASA’s Jet Propulsion Laboratory in Pasadena, California. Cred...
More
timelapse video of Europa Clipper instrument components
Europa Clipper Antennae Test