Skip Navigation
menu close modal

All Resources

Europa Clipper E-THEMIS Thermal Camera Focal Plane Module

close-up view of the focal plane module of E-THEMIS
Source: NASA/Arizona State University
Published: July 1, 2021

An engineering model of the focal plane module for Europa Clipper’s E-THEMIS instrument. 

ENLARGE

Related

Dark, irregular features on Jupiter's moon Europa.
More
Chaotic, swirling terrain on Europa.
Thera and Thrace Macula on Europa
The vault plate is installed on NASA's Europa Clipper spacecraft on May 3, 2024.
More
The triangular-shaped, silver-colored vault plate can be seen attached to the Europa Clipper spacecraft. Two metal bars cross in front of the plate. Several screws can be seen holding the plate to the spacecraft. Orange colored wires run alongside the other equipment on the spacecraft.
Europa Clipper Vault Plate Installed
Europa Clipper’s 28-foot (8.5-meter) magnetometer boom is deployed at NASA’s Jet Propulsion Laboratory.
More
Seven workers in white lab coats, cleanroom bouffant caps, and blue face masks stand near Europa Clipper’s magnetometer boom after the boom was unfurled. The boom is covered in protective silver-colored material and is supported by several aluminum-colored stands.
The Europa Clipper Magnetometer Boom Deployed
This animation segment shows the deployment of NASA’s Europa Clipper REASON instrument after launch.
More
Animation showing the REASON antennas extending from the front and back of both sides of the spacecraft's solar arrays.
Mission Animation: REASON Deployment
This video shows the installation of one of the main computers of the spacecraft.
More
Video showing the installation of hardware in a white clean room, with a silver box being hoisted and then moved.
Main Computer Installation
The prominent "X" near the center of the mosaic is the junction of two "triplebands," parallel sets of ridges.
More
Ridges form X on surface of Europa
Prominent "X" on Europa
Students use the fundamentals of density to propose a model for the interior structure of Europa.
More
Two clear plastic clubs are visible on a table. The cup visible on the left has sediment on the bottom and water above it. The cup visible on the right has coarse rocks on the bottom and water and ice above it.
Discovering Alien Oceans: Density
The Europa Clipper Solar Array Mechanical Simulator is shown installed on the spacecraft’s propulsion module.
More
An image showing the Europa Clipper Solar Array Mechanical Simulator installed on the spacecraft’s propulsion module.
Solar Array Mechanical Simulator
The propulsion module harness, installed onto a bake-out fixture, is rolled up to the propulsion module in preparation for transfer and installation. The harness is the cabling that connects all of...
More
people working on the spacecraft in the clean room
Europa Clipper Propulsion Module
The high gain antenna for the Europa Clipper recently underwent testing. 
More
Europa Clipper's large high gain antenna, which is taller than a person and is painted dark black, is hoisted on mechanical supports on a large, multi-story room that has its floor, walls, and ceiling covered in blue foam triangles to avoid interference during testing.
High Gain Antenna Testing
The images used for the base of this globe were chosen from coverage supplied by the Galileo solid-state imaging (SSI) camera and Voyager 1 and 2 spacecraft.
More
two hemispheric map projections
Europa Hemispherical Globes
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
More
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
Plasma Instrument Thermal Testing
Reddish spots and shallow pits pepper the enigmatic ridged surface of Europa.
More
Image of Europa surface
Ruddy "Freckles" on Europa
The animation shows the geometry of the magnetic field created within Europa’s subsurface ocean as Europa moves through Jupiter’s magnetic field.
More
animation of the magnetic field created within Europa’s subsurface ocean as Europa moves through Jupiter’s magnetic field
Induced Magnetic Field from Europa's Subsurface Ocean
An engineering model of Europa Clipper's MASPEX instrument.
More
An engineering model of Europa Clipper's MASPEX instrument.
MAss Spectrometer for Planetary EXploration/Europa (MASPEX)
The SUDA instrument undergoes dust acceleration testing. 
More
Video showing engineers handling the SUDA instrument as it is loaded into a vacuum chamber for dust testing and then moved back to a clean room.
SUDA Dust Test Timelapse
This view of Cilix impact crater on Europa was created in 2013 using 3-D stereo images.
More
Crater 3-D
3-D Cilix Crater on Europa
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing.
More
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing in October 2021. After the spacecraft’s launch in October 2024, the star tracker will autonomously identify stars to determine Europa Clipper’s orientation in space. The device is essential for precisely pointing the spacecraft’s science instruments and communication antennas.
Star Tracker Electronics Box
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern...
More
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. The instrument’s housing and some other components were manufactured in machine shops at JPL, where the instrument is being built and tested. Some of the spacecraft’s other science instruments and hardware are being built and tested at partner institutions around the U.S. and abroad. As with Europa Clipper’s other science instruments, MISE was designed specifically to help determine if Jupiter’s ice-covered moon Europa is habitable.
MISE in Clean Room
Workers at NASA’s Jet Propulsion Laboratory in Southern California watch as the Europa Clipper’s magnetometer boom is tested.
More
Three workers in white lab coats, cleanroom bouffant caps, and blue face masks watch as Europa Clipper’s magnetometer boom is tested. Part of the equipment holding the boom can be seen in front of the workers.
Europa Clipper Magnetometer Boom is Tested
This graphic shows the location of water vapor detected over Europa's south pole that provides the first strong evidence of water plumes erupting off Europa's surface.
More
Illustration showing the location of water vapor emerging from the South Pole of Europa.
Water Vapor Plumes Over Europa
This image of Europa, an icy satellite of Jupiter about the size of the Earth's Moon, was obtained from a range of 7,415 miles (11,933 kilometers) by the Galileo spacecraft during its fourth orbit ...
More
circular pattern on icy surface
Macula on Europa
Dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants
More
An image showing that dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants.
Dust Analyzer in the Clean Room
Europa Clipper’s spectrometer, Mapping Imaging Spectrometer for Europa (MISE), is seen in the midst of assembly in a clean room at NASA’s Jet Propulsion Laboratory. MISE will analyze infrared light...
More
The Mapping Imaging Spectrometer for Europa (MISE), is shown here in the midst of assembly in a clean room at JPL.
The Mapping Imaging Spectrometer for Europa (MISE) Science Instrument
An engineer removes protective plastic wrap from Europa Clipper's propulsion module.
More
An engineer removes protective plastic wrap from Europa Clipper's propulsion module in a cleanroom.
Europa Clipper Propulsion Module