Skip Navigation
menu close modal

All Resources

Prepping Europa Clipper's Propulsion Tanks

Contamination control engineers in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, evaluate a propellant tank before it is installed in NASA's Europa Clipper spacecraft.
Source: NASA/GSFC Denny Henry
Published: August 5, 2021

Engineers at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, prepare for a propellant tank to be inserted into the cylinder in the background at left. The cylinder is one of two that make up Europa Clipper’s propulsion module.

ENLARGE

Related

The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
More
The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
Europa-UVS Final Configuration
Europa Clipper’s mass spectrometer was delivered to JPL in December 2022.
More
A group of eleven engineers wearing full-body white protective clothing stand facing the camera in a cleanroom. All of the engineers are giving a thumbs up hand expression. In the middle of the group of engineers is a large transparent box, approximately five feet tall, two feet wide, and two feet deep. Inside the transparent box is the mass spectrometer. Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure.
Europa Clipper's Mass Spectrometer Delivered to JPL
The imaging spectrometer's scanning mirror and data processing unit are carefully packaged into a specialized shipping container.
More
Members of Europa Clipper’s imaging spectrometer instrument, called MISE, team at the Johns Hopkins Applied Physics Laboratory carefully package the instrument’s scanning mirror and data processing unit into a specialized shipping container.
Imaging Spectrometer's Scanning Mirror and Data Processing Unit Packaging
The vault plate is installed on NASA's Europa Clipper spacecraft on May 3, 2024.
More
The triangular-shaped, silver-colored vault plate can be seen attached to the Europa Clipper spacecraft. Two metal bars cross in front of the plate. Several screws can be seen holding the plate to the spacecraft. Orange colored wires run alongside the other equipment on the spacecraft.
Europa Clipper Vault Plate Installed
This enhanced color image from NASa's Galileo mission shows the region surrounding the young impact crater Pwyll on Jupiter's moon Europa.
More
Impact crater on Europa.
Pwyll Crater
Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Ultraviolet Spectrograph Delivered to JPL
Print your own 3D scale model of Europa Clipper!
More
Visual showing 3D model available for download.
Europa Clipper Scale Model - 3D Print
This infrared image of Europa, showing heat radiation from its surface at a wavelength of 27 microns (millionths of a meter), provides the best view yet of Europa's daytime temperatures. 
More
bright colors indicate temperatures on a curved surface
Daytime Temperatures on Europa
The imaging spectrometer's scanning mirror and data procesing unit are loaded onto a shipping truck. 
More
Members of Europa Clipper’s imaging spectrometer instrument, called MISE, team at the Johns Hopkins Applied Physics Laboratory place a container loading the instrument’s scanning mirror and data processing unit on a shipping truck. The truck transported the instrument parts to NASA’s Jet Propulsion Laboratory in Pasadena, California, in November 2021.
Imaging Spectrometer Component Shipping
The image on the left shows a region of Europa's crust made up of blocks which are thought to have broken apart and "rafted" into new positions. 
More
color full disc view of moon with higher res section called out
Blocks in the Europan Crust Provide More Evidence of Subterranean Ocean
NASA's New Horizons spacecraft took this image of Europa hanging above Jupiter's cloud tops.
More
Black and white image of Europa in space.
New Horizons Spies Europa
During its twelfth orbit around Jupiter, on Dec. 16, 1997, NASA's Galileo spacecraft made its closest pass of Jupiter's icy moon Europa, soaring 124 miles (200 kilometers) kilometers above the icy ...
More
black and white view of ridges and rough terrain on an icy surface
Highest Resolution Image of Europa
A worker kneels beside Europa Clipper’s narrow-angle camera.
More
A worker kneels beside the Europa Clipper’s narrow-angle camera (NAC), which is on a metal platform with rods sticking straight up at the corners of the platform. The worker is covered head-to-toe in white protective clothing called a bunny suit. The worker is wearing a blue head covering, and a bright blue face mask. The NAC is wrapped in silver-colored insulating material, it has a round base about the size of tire. The lens is sticking out at an angle and is laced up inside the insulating material.
Europa Clipper's Narrow-Angle Camera Delivered to JPL
A close-up view of the top of the inward-facing side of the Europa Clipper vault plate. It's engraved with the Drake Equation, and the Jovian system with a bottle replacing Jupiter. 
More
This is a close-up view of the top of the Europa Clipper's triangular-shaped silver vault plate. It has a rounded top and a flat bottom. This view shows the Drake Equation, and a drawing of the Jovian system with Jupiter replaced with a bottle.
Europa Clipper Vault Plate - Inward Facing Top
An engineer handles the SUrface Dust Analyzer (SUDA) in the clean room at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. Dry nitrogen gas is continua...
More
An image showing an engineer handles the SUrface Dust Analyzer (SUDA) in the clean room at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. Dry nitrogen gas is continually pumped through the instrument during assembly and testing to ensure it remains clean and free of contaminants.
Dust Analyzer in the Clean Room
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
More
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
Standing Tall: Europa Clipper's High-Gain Antenna
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
More
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
High-Gain Antenna Communications Dish
The flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. 
More
Shown is the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. MISE will map the distribution of ices, salts, organics, and the warmest hotspots on Europa. In collaboration with the spacecraft’s other instruments – particularly the visible light cameras and ice-penetrating radar – infrared maps from MISE will help scientists understand Europa’s geologic history, which is one of the key characteristics that will help scientists determine if Europa’s suspected ocean is suitable for life.
MISE Assembly
This image of Europa, an icy satellite of Jupiter about the size of the Earth's Moon, was obtained from a range of 7,415 miles (11,933 kilometers) by the Galileo spacecraft during its fourth orbit ...
More
circular pattern on icy surface
Macula on Europa
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
An animation showing a boom extending from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Distance)
The flight model of Europa Clipper’s thermal camera is shown during a fit-check, in which technicians ensure the instrument’s various components fit together properly.
More
The flight model of Europa Clipper’s thermal camera is shown during a fit-check, in which technicians ensure the instrument’s various components fit together properly. The test was performed in a clean room at Arizona State University, which is building the instrument and performing initial tests on the hardware. The Europa Thermal Emission Imaging System (E-THEMIS) will use infrared light to distinguish warmer regions on Europa’s surface, where liquid water may be near the surface or might have erupted onto the surface. E-THEMIS will also measure surface texture to understand the small-scale properties of Europa’s surface.
E-THEMIS Flight Fit Check
An accelerometer is attached to a plasma instrument sensor assembly during a vibration test.
More
An accelerometer is attached to a plasma instrument sensor assembly during a vibration test.
Plasma Instrument Vibration Testing
In this lab activity, students become materials scientists for a day.
More
NASA's Cassini spacecraft is visible in front of Saturn's moon Enceladus, which is seen as a white, frosty glove with plumes in the lower left of the moon. The space around it has a purple color.
Classroom Activity: Spacecraft Materials and the Chemistry of Space Exploration
Europa Clipper's propulsion module arrives in a shipping container at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module in its shipping container
Europa Clipper Propulsion Module
The Europa Clipper Solar Array Mechanical Simulator is shown installed on the spacecraft’s propulsion module.
More
An image showing the Europa Clipper Solar Array Mechanical Simulator installed on the spacecraft’s propulsion module.
Solar Array Mechanical Simulator