Skip Navigation
CLIPPER CAM
icon/broadcasting LIVE
menu close modal

All Resources

Europa Clipper Propulsion Module

people wearing clean room attire work on the spacecraft's electrical system
Source: APL/Ed Whitman
Published: August 3, 2021

The bake-out fixture is modified in preparation for the transfer and installation of the harness onto the propulsion module structure. The harness is the cabling that connects all of the electronics for the overall electrical spacecraft system.

Pictured Left to Right: Steve Wenrich, Spencer Brock, Carlisa Drew, and John Stinchcomb.

ENLARGE

Related

Engineers and technicians work together to install reaction wheels on the underside of the main body of NASA’s Europa Clipper spacecraft, which is in its assembly, test, and launch operations phase...
More
The main body of the spacecraft standing in a white clean room is the central component of this image. The tall structure is covered with protective covers to keep sensitive equipment safe during assembly and what looks like white paper, which is being used for patterning for the spacecraft’s protective insulation. Four engineers are seen under the base of the spacecraft, where they are installing the reaction wheels, as if they are working on the undercarriage of a car. Two engineers on the left are on their stomachs, and two engineers on the right are on their back.
NASA's Europa Clipper: Reaction Wheel Installation
The flight model of Europa Clipper’s thermal camera is shown during a fit-check, in which technicians ensure the instrument’s various components fit together properly.
More
The flight model of Europa Clipper’s thermal camera is shown during a fit-check, in which technicians ensure the instrument’s various components fit together properly. The test was performed in a clean room at Arizona State University, which is building the instrument and performing initial tests on the hardware. The Europa Thermal Emission Imaging System (E-THEMIS) will use infrared light to distinguish warmer regions on Europa’s surface, where liquid water may be near the surface or might have erupted onto the surface. E-THEMIS will also measure surface texture to understand the small-scale properties of Europa’s surface.
E-THEMIS Flight Fit Check
Europa Clipper’s surface dust analyzer instrument was delivered to JPL in September 2022. 
More
A large group of engineers in full white body coveralls stand surrounding Europa Clipper’s surface dust analyzer. All the engineers are giving a “thumbs up” hand gesture to indicate that the instrument was successfully delivered. Nine engineers stand to the left of a silver workbench, on which the instrument rests, and six stand to the right of the workbench. The instrument is gold colored and about the size of a drum, resting on its side. The instrument is resting upon a silver workbench in the cleanroom.
Europa Clipper's Dust Analyzer Delivered to JPL
Europa Clipper’s mass spectrometer was delivered to JPL in December 2022.
More
A group of eleven engineers wearing full-body white protective clothing stand facing the camera in a cleanroom. All of the engineers are giving a thumbs up hand expression. In the middle of the group of engineers is a large transparent box, approximately five feet tall, two feet wide, and two feet deep. Inside the transparent box is the mass spectrometer. Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure.
Europa Clipper's Mass Spectrometer Delivered to JPL
The spacecraft’s developmental test model installed in a clean room.
More
In the center of the photo, an engineer stands to the left of Europa Clipper’s developmental test model, which is visible as a large, aluminum cylinder with an aluminum box and other aluminum structures protruding from the box. The aluminum box replicates the spacecraft’s avionics vault, while the cylinder replicates the spacecraft’s propulsion module. The test model is towering more than twice as high as the engineer, who is wearing full white body scrubs. To the left and further back in the clean room, the spacecraft’s flight model is visible.
Europa Clipper's Developmental Test Model
Researchers at Langley prepare to move the high gain antenna for  into the Experimental Test Range at the NASA Langley Research Center. 
More
Researchers stand next to Europa Clipper’s high gain antenna, which is taller than a person and is painted dark black, as they prepare to move it into a testing facility.
High Gain Antenna Testing
This graphic of Jupiter's moon Europa maps a relationship between the amount of energy deposited onto the moon from charged-particle bombardment and the chemical contents of ice deposits on the sur...
More
two global views of Europa with colors representing chemical components
Energy From Above Affecting Surface of Europa
This 12-frame mosaic provides the highest resolution view ever obtained of the side of Jupiter's moon Europa that faces the giant planet.
More
full-disc black and white view of moon
Europa's Jupiter-Facing Hemisphere
Build your own version of Europa Clipper, learning how each part of the spacecraft fits together as you go. 
More
Simple paper model of Europa Clipper available for download.
Europa Clipper Paper Model
Engineers and technicians lift the tall core of NASA’s Europa Clipper spacecraft during a maneuver to position it in the High Bay 1 clean room of the Spacecraft Assembly Facility at the agency’s Je...
More
In the center of the image, the main body of the Europa Clipper spacecraft hangs from a yellow crane in a large, multistoried cleanroom with white walls and a white ceiling. Six engineers in full-body coveralls and masks stand around the base of the main body as it hangs from the crane, with some working on the main body. In the distance, a viewing gallery is visible with four people watching the activities taking place.
The Lift: NASA's Europa Clipper Moves into Position
The high gain antenna for the Europa Clipper recently underwent testing. 
More
Europa Clipper's large high gain antenna, which is taller than a person and is painted dark black, is hoisted on mechanical supports on a large, multi-story room that has its floor, walls, and ceiling covered in blue foam triangles to avoid interference during testing.
High Gain Antenna Testing
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Engineers Inspect Ultraviolet Spectrograph
The prominent "X" near the center of the mosaic is the junction of two "triplebands," parallel sets of ridges.
More
Ridges form X on surface of Europa
Prominent "X" on Europa
This image of the Jovian moon Europa was taken by Voyager 2 the spacecraft passed within 139,800 miles (225,000 kilometers) on July 9, 1979.
More
cracked, icy surface
Europa's Evening Terminator
This view of the south polar region of Jupiter's moon Europa shows part of a gray band that formed as plates on the icy surface separated and material filled in the widening gap.
More
parallel ridges on an icy surface
A Record of Crustal Movement on Europa
False color has been used here to enhance the visibility of certain features in this composite of three images of the Minos Linea region on Jupiter's moon Europa taken on June 28, 1996 Universal Ti...
More
cracked ice in bright color
Europa In Color
Engineers and technicians in a clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium pressurant onto the propulsion module of NASA’s ...
More
Engineers and technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium onto the propulsion module of NASA's Europa Clipper spacecraft.
Europa Clipper Propulsion Module: Integration Underway
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
More
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
Thermal Imager's First Light Test
An engineer ground tests Europa Clipper’s dust analyzer.
More
The SUDA sensor head rests upon a table in a clean room. The sensor head is gold in color, shaped slightly like a drum on its side with a door facing the viewer that is closed. An engineer in white coveralls, a mask, and light blue gloves is on the right side of the image and is seen peering over the instrument. The engineer is holding a handheld device attached a blue wire, which itself is attached to the sensor head, and they perform a test. Is a purple light is shown on the table and on the front of the engineer.
Electrical Ground Testing Europa Clipper's Dust Analyzer
In a clean room at NASA's Jet Propulsion Laboratory in Southern California, engineers handle Europa Clipper’s newly installed star trackers.
More
Four engineers wearing white full-body coveralls, gloves, and masks, handle a flat metal structure a few inches thick, to which are attached two telescopes a foot or more long, while a fifth worker in identical attire stands to the side, holding hand-held controls for the crane that’s lofting the hardware.
Star Tracker Integration
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
More
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
Ultraviolet Spectrograph Shipment Preparations
Recently assembled Faraday cup sensors and instrument housings in two configurations.
More
PIMS Faraday Cup Sensors
PIMS Faraday Cup Sensors
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
More
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
Plasma Instrument Thermal Testing
This image shows a close-up view of terrain within the region of Europa's surface named Conamara.
More
Image of terrain on Europa
Conamara Color Closeup
This image of Europa, an icy satellite of Jupiter about the size of the Earth's Moon, was obtained from a range of 7,415 miles (11,933 kilometers) by the Galileo spacecraft during its fourth orbit ...
More
circular pattern on icy surface
Macula on Europa