Skip Navigation
menu close modal

All Resources

Classroom Activity: Calculating Solar Power in Space

NASA's Juno spacecraft is visible in front of Jupiter, which appears as a large planet looming in the distance. All three of Juno's solar arrays are visible

Artist concept of NASA's Juno spacecraft, which in January 2016 became the most distant solar-powered spacecraft. Image credit: NASA/JPL-Caltech

Students will explore the practical applications of exponents and division to investigate what it takes for NASA spacecraft to travel deep into the solar system using only solar power.

View the full classroom activity on the JPL Education website ›

Additional Resources

Related

Workers at NASA’s Jet Propulsion Laboratory in Southern California deploy Europa Clipper’s magnetometer boom.
More
Two workers in white lab coats, cleanroom bouffant caps, and blue face masks have their backs to the camera as they unfurl as Europa Clipper’s magnetometer boom. A blue frame that holds the boom can be seen. The boom is supported by several silver-colored stands.
Workers Deploy the Europa Clipper Magnetometer Boom
The bake-out fixture is modified in preparation for the transfer and installation of the harness onto the propulsion module structure. The harness is the cabling that connects all of the electronic...
More
people wearing clean room attire work on the spacecraft's electrical system
Europa Clipper Propulsion Module
An engineer handles the SUrface Dust Analyzer (SUDA) in the clean room at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. Dry nitrogen gas is continua...
More
An image showing an engineer handles the SUrface Dust Analyzer (SUDA) in the clean room at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. Dry nitrogen gas is continually pumped through the instrument during assembly and testing to ensure it remains clean and free of contaminants.
Dust Analyzer in the Clean Room
Members of the Europa Clipper team work on the spacecraft’s heat redistribution system at Jet Propulsion Laboratory in 2019.
More
Members of the Europa Clipper team work on the spacecraft’s heat redistribution system at Jet Propulsion Laboratory in 2019.
Europa Clipper's Thermal Tubing
Europa Clipper's propulsion module is offloaded from its transportation trailer following arrival at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper Propulsion Module arrival at the Johns Hopkins Applied Physics Laboratory
Europa Clipper Propulsion Module
Engineers inspect Europa Clipper's plasma detection instrument. 
More
An engineer examines a faraday cup, part of Europa Clipper's plasma detection instrument, which is resting on a table in a clean room. The engineer is using a flash light to examine the instrument.
Plasma Detection Instrument Delivered to JPL
A 3D model of the Plasma Instrument for Magnetic Sounding (PIMS), a plasma and magnetic field instrument on Europa Clipper. 
More
3d model of PIMS instrument
PIMS
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern...
More
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. The instrument’s housing and some other components were manufactured in machine shops at JPL, where the instrument is being built and tested. Some of the spacecraft’s other science instruments and hardware are being built and tested at partner institutions around the U.S. and abroad. As with Europa Clipper’s other science instruments, MISE was designed specifically to help determine if Jupiter’s ice-covered moon Europa is habitable.
MISE in Clean Room
An accelerometer is attached to a plasma instrument sensor assembly during a vibration test.
More
An accelerometer is attached to a plasma instrument sensor assembly during a vibration test.
Plasma Instrument Vibration Testing
Europa Clipper’s spectrometer, Mapping Imaging Spectrometer for Europa (MISE), is seen in the midst of assembly in a clean room at NASA’s Jet Propulsion Laboratory. MISE will analyze infrared light...
More
The Mapping Imaging Spectrometer for Europa (MISE), is shown here in the midst of assembly in a clean room at JPL.
The Mapping Imaging Spectrometer for Europa (MISE) Science Instrument
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
Engineers test a prototype of one of Europa Clipper’s radar antennas in 2018 on a hilltop at NASA’s Jet Propulsion Laboratory. 
More
engineers working on a spacecraft instrument at JPL
Europa Clipper REASON Radar Antenna Test JPL
An engineering (non-flight) model of the EIS narrow-angle camera.
More
An engineering (non-flight) model of the EIS narrow-angle camera
Europa Imaging System Narrow Angle Camera
The telescope housing for Europa Clipper’s E-THEMIS instrument.
More
The telescope housing for Europa Clipper’s E-THEMIS instrument.
E-THEMIS Telescope Housing
NASA’s Goddard Space Flight Center (GSFC) engineers align the upper and lower cylinders of Europa Clipper’s propulsion module for a fit check.
More
NASA’s Goddard Space Flight Center (GSFC) engineers align the upper and lower cylinders of Europa Clipper’s propulsion module for a fit check.
Propulsion Module Fit Check
An engineer ground tests Europa Clipper’s dust analyzer.
More
The SUDA sensor head rests upon a table in a clean room. The sensor head is gold in color, shaped slightly like a drum on its side with a door facing the viewer that is closed. An engineer in white coveralls, a mask, and light blue gloves is on the right side of the image and is seen peering over the instrument. The engineer is holding a handheld device attached a blue wire, which itself is attached to the sensor head, and they perform a test. Is a purple light is shown on the table and on the front of the engineer.
Electrical Ground Testing Europa Clipper's Dust Analyzer
The SUDA instrument undergoes dust acceleration testing. 
More
Video showing engineers handling the SUDA instrument as it is loaded into a vacuum chamber for dust testing and then moved back to a clean room.
SUDA Dust Test Timelapse
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing.
More
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing in October 2021. After the spacecraft’s launch in October 2024, the star tracker will autonomously identify stars to determine Europa Clipper’s orientation in space. The device is essential for precisely pointing the spacecraft’s science instruments and communication antennas.
Star Tracker Electronics Box
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
Engineers and technicians install a high-gain antenna on NASA's Europa Clipper spacecraft.
More
Workers on a raised platform move the Europa Clipper's high gain antenna, which is covered in aluminum colored protective material.
Europa Clipper's High-Gain Antenna Installed
Europa Clipper’s 28-foot (8.5-meter) magnetometer boom is unfurled at NASA’s Jet Propulsion Laboratory.
More
Several workers in white lab coats, cleanroom bouffant caps, and blue face masks work around Europa Clipper’s magnetometer boom after the boom was unfurled. Some of the workers are on the floor beneath the boom. Others are standing nearby. The boom is covered in protective silver-colored material and is supported by several aluminum-colored stands.
Europa Clipper Team Deploys Magnetometer Boom
This unprocessed image shows the successful “first light” for Europa Clipper’s MISE instrument.
More
A blue image with a thin vertical white line in the center.
MISE First Light
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Euro...
More
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) EBox and the spectrometer prior to flight model calibration.
Mass Spectrometer Assembly
Engineers and technicians in a clean room at NASA’s Jet Propulsion Laboratory display the thick-walled aluminum vault they helped build for the Europa Clipper spacecraft. The vault will protect the...
More
Engineers and technicians in a clean room at NASA's Jet Propulsion Laboratory in Southern California stand between the thick-walled aluminum vault and its duplicate that they helped build for the agency's Europa Clipper spacecraft.
Complete: Europa Clipper Vault and Its Twin
Engineers install a 2-foot-wide reaction wheel onto the main body of NASA’s Europa Clipper spacecraft at the agency’s Jet Propulsion Laboratory in Southern California.
More
The reaction wheel is seen in the center of this image, shown as a black circulate object two feet wide in width. It’s shown at a slight angle as it is being installed on the spacecraft. Two engineers are seen facing the camera from behind the reaction wheel, and they hold the reaction wheel while it is being installed. The reaction wheel is resting slightly on a small cart with wheels. Above the reaction wheel and the engineers is the body of the spacecraft, which is barely visible.
NASA's Europa Clipper Reaction Wheel in Process