Skip Navigation
menu close modal

All Resources

Dust Analyzer in the Clean Room

An image showing that dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants.
Source: NASA/LASP-CU Boulder
Published: December 29, 2021

Dry nitrogen gas is continually pumped through the SUrface Dust Analyzer (SUDA) instrument during assembly and testing to ensure it remains clean and free of contaminants

ENLARGE

Related

Europa Clipper’s surface dust analyzer instrument is examined following delivery to JPL in September 2022.
More
An engineer in a full body coverall and a fask mask is shown on the left side of the image, holding a small black flashlight the size of a pen and examining Europa Clipper’s surface dust analyzer instrument. The instrument is gold colored and about the size of a drum, resting on its side. The instrument is resting upon a silver workbench in the cleanroom.
Europa Clipper's Dust Analyzer Delivered to JPL
This high resolution image of the icy crust of Europa reveals a surface crisscrossed by multiple sets of ridges and fractures. 
More
Various linear ridges on Europa as seen from orbit.
Europa's Crisscrossed Ridges and Fractures
NASA’s Europa Clipper, with all of its instruments installed, is visible in the clean room of High Bay 1. 
More
NASA’s Europa Clipper, with all of its instruments installed, is visible in the clean room of High Bay 1 at the agency’s Jet Propulsion Laboratory on Jan. 19.
Europa Clipper Electromagnetic Testing
All four of the reaction wheels installed onto NASA’s Europa Clipper are visible in this photo, which was shot from underneath the main body of the spacecraft while it was being assembled at the ag...
More
Four reaction wheels are seen here, one in each of the four corners of the image. The reaction wheels are black. In the configuration shown, the wheels are visible from their sides, which allows you to see the wiring and other mechanical equipment attached to the reaction wheels. In the middle of this image you can see a silver triangle, which is base of the main body of the spacecraft. Thick bundles of gold wires extend from the reaction wheels, with green tape holding the bundles into place as the spacecraft continues through assembly.
NASA's Europa Clipper Reaction Wheels Installed
Workers at NASA’s Jet Propulsion Laboratory in Southern California watch as the Europa Clipper’s magnetometer boom is tested.
More
Three workers in white lab coats, cleanroom bouffant caps, and blue face masks watch as Europa Clipper’s magnetometer boom is tested. Part of the equipment holding the boom can be seen in front of the workers.
Europa Clipper Magnetometer Boom is Tested
An engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulde...
More
An image showing an engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. SUDA is extremely sensitive and will be able to detect amino acids in concentrations as low as one part per million within water ice.
Dust Analyzer Ion Detector
Engineers and technicians lift the tall core of NASA’s Europa Clipper spacecraft during a maneuver to position it in the High Bay 1 clean room of the Spacecraft Assembly Facility at the agency’s Je...
More
In the center of the image, the main body of the Europa Clipper spacecraft hangs from a yellow crane in a large, multistoried cleanroom with white walls and a white ceiling. Six engineers in full-body coveralls and masks stand around the base of the main body as it hangs from the crane, with some working on the main body. In the distance, a viewing gallery is visible with four people watching the activities taking place.
The Lift: NASA's Europa Clipper Moves into Position
Europa Clipper’s ultraviolet spectrograph is the first science instrument installed on the spacecraft’s nadir deck.
More
A matte-gray polygonal structure about the size of a coffee table sits on end in a white and gray room, and an electronics box is mounted to the structure’s right side.
Ultraviolet Spectrograph Integration
Reanalysis of old data data suggests that the Galileo spacecraft, on its closest flyby of Europa, flew through a plume.
More
Video describing new discoveries at Europa using old data.
Re-analyzing Old Data Reveals New Evidence at Europa
This enhanced color image from NASa's Galileo mission shows the region surrounding the young impact crater Pwyll on Jupiter's moon Europa.
More
Impact crater on Europa.
Pwyll Crater
This infrared image of Europa, showing heat radiation from its surface at a wavelength of 27 microns (millionths of a meter), provides the best view yet of Europa's daytime temperatures. 
More
bright colors indicate temperatures on a curved surface
Daytime Temperatures on Europa
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
An engineer configures the sensor head for Europa Clipper’s dust analyzer for magnetics testing.  
More
The SUDA sensor head rests upon a table in a clean room. The sensor head is gold in color, shaped slightly like a drum on its side. It is attached a device that lifts the sensor head from the table, and is seen slightly to the ride of center in the image. An engineer wearing white full body coveralls, light blue gloves, glasses, and a mask stands behind the sensor head and the table it is on, looking down at the sensor head. Two additional engineers stand in the distance on either side of the sensor head, both wearing full white body coveralls, masks, and light blue gloves.
Configuring Europa Clipper's Dust Analyzer for Magnetics Testing
A map centered at the estimated source region for potential plumes from Europa.
More
Plumes
Source Region for Possible Europa Plumes
Europa Clipper project scientist Robert Pappalardo presents the Monolith Award to Karla Clark.
More
Europa Clipper project scientist on right presents a black, rectangle-shaped award to Karla Clark, a woman standing on the left.
Europa Clipper Monolith Award
An engineer ground tests Europa Clipper’s dust analyzer.
More
The SUDA sensor head rests upon a table in a clean room. The sensor head is gold in color, shaped slightly like a drum on its side with a door facing the viewer that is closed. An engineer in white coveralls, a mask, and light blue gloves is on the right side of the image and is seen peering over the instrument. The engineer is holding a handheld device attached a blue wire, which itself is attached to the sensor head, and they perform a test. Is a purple light is shown on the table and on the front of the engineer.
Electrical Ground Testing Europa Clipper's Dust Analyzer
This view from NASA's Galileo spacecraft shows a severely fractured surface on Europa.
More
Black and white image close-up of surface.
Fractured Land
In this lab activity, students become materials scientists for a day.
More
NASA's Cassini spacecraft is visible in front of Saturn's moon Enceladus, which is seen as a white, frosty glove with plumes in the lower left of the moon. The space around it has a purple color.
Classroom Activity: Spacecraft Materials and the Chemistry of Space Exploration
Europa Clipper’s mass spectrometer is examined following delivery to JPL in December 2022.
More
Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure. Engineers are visible in the background working.
Europa Clipper's Mass Spectrometer Delivered to JPL
This artist's concept shows a simulated view from the surface of Jupiter's moon Europa. Europa's potentially rough, icy surface, tinged with reddish areas that scientists hope to learn more about, ...
More
field of icy boulders with jupiter rising over the horizon
Simulated View from Europa's Surface (Artist's Concept)
This mosaic of the south polar region of Jupiter's moon Europa shows the northern 180 miles (290 kilometers) of a strike-slip fault named Astypalaea Linea.
More
linear terrain features on an icy surface
San Andreas-sized Strike-slip Fault on Europa
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Euro...
More
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) EBox and the spectrometer prior to flight model calibration.
Mass Spectrometer Assembly
Recently assembled Faraday cup sensors and instrument housings in two configurations.
More
PIMS Faraday Cup Sensors
PIMS Faraday Cup Sensors
The SUrface Dust Analyser (SUDA) instrument for Europa Clipper, shown during assembly and testing at the Laboratory for Atmospheric and Space Physics, University of Colorado, Boulder.
More
The SUrface Dust Analyser (SUDA) instrument for Europa Clipper, shown during assembly and testing at the Laboratory for Atmospheric and Space Physics, University of Colorado, Boulder.
SUDA Assembly and Testing
Technicians at NASA’s Kennedy Space Center guide Europa Clipper as a crane hoists the spacecraft on May 28, 2024.
More
Workers in blue overalls and white head covers help guide Europa Clipper as a crane hoists it as part of prelaunch processing.
Europa Clipper Rotated at KSC