Skip Navigation
CLIPPER CAM
icon/broadcasting LIVE
menu close modal

All Resources

Mission Animation: Fairing Separation

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows the fairing separation after NASA’s Europa Clipper spacecraft leaves Earth.

See more animations here.

Related content pages

Related

Europa Clipper’s power control and distribution assembly is lowered into the spacecraft’s electronics vault. 
More
In a sterile white room, five people wearing white full-body coveralls, gloves, and masks monitor a metal box about the size of a microwave oven as a crane lowers the box in to a larger hollow metal box about six feet wide.
Power Control and Distribution Assembly Integration
This animation shows a 360 of NASA’s Europa Clipper spacecraft. 
More
This animation shows a 360 of NASA’s Europa Clipper spacecraft.
Mission Animation: Spacecraft 360
This simulation shows possible spectroscopy results of Europa’s water plumes, obtained using the Webb telescope’s NIRSpec instrument.
More
Possible spectroscopy results of Europa’s water plumes
Possible Spectroscopy Results of Europa Using Webb
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
The instrument sensor head for Europa Clipper’s dust analyzer is seen in a clean room during the installation of multi-layer insulation prior to thermal balancing testing.
More
The instrument sensor head is shown in the middle of the image as a large metallic device, gold in color, with wiring attached. The sensor is resting on a table in a cleanroom. There are no people visible in the image. Multi-layer insulation is visible on the top and underneath the instrument. On the side of the instrument is a panel with information etched in, including “SUDA SENSOR HEAD”, “LASP” (which refers to the Laboratory for Atmospheric and Space Physics), and the mascot symbol for the University of Boulder, which is a buffalo.
Preparing Europa Clipper's Dust Analyzer for Thermal Balance Testing
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
The outward-facing side of Europa Clipper's vault plate shows waveforms symbolizing the word 'water' in multiple languages.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Water Words
Print your own 3D scale model of Europa Clipper!
More
Visual showing 3D model available for download.
Europa Clipper Scale Model - 3D Print
In this activity, students learn how light and energy are spread throughout space.
More
Large solar panels for NASA's Juno spacecraft are visible in a clean room being deployed, surrounded by engineers in full body coveralls.
Classroom Activity: Inverse Square Law Demo
Engineers and technicians lift the tall core of NASA’s Europa Clipper spacecraft during a maneuver to position it in the High Bay 1 clean room of the Spacecraft Assembly Facility at the agency’s Je...
More
In the center of the image, the main body of the Europa Clipper spacecraft hangs from a yellow crane in a large, multistoried cleanroom with white walls and a white ceiling. Six engineers in full-body coveralls and masks stand around the base of the main body as it hangs from the crane, with some working on the main body. In the distance, a viewing gallery is visible with four people watching the activities taking place.
The Lift: NASA's Europa Clipper Moves into Position
This artist's rendering shows NASA's Europa Clipper spacecraft, which is aiming for launch readiness by 2024.
More
artist's rendering of the Europa Clipper spacecraft with Europa and Jupiter in the background
2021 Europa Clipper Spacecraft (Artist's Concept)
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
More
Scientists put Europa Clipper’s ultraviolet spectrograph through its final calibrations prior to shipment to NASA’s Jet Propulsion Laboratory.
Ultraviolet Spectrograph Shipment Preparations
Engineering flight technicians install the flight scanner into the MISE instrument.
More
Two engineering flight technicians, one with white and one with light-brown skin, wearing full protective gear at a table in a clean room, installing the flight scanner into the MISE instrument.
MISE Flight Scanner Installation
Engineers work on Europa Clipper's electronics vault.
More
Three engineers wearing full-body coveralls, gloves, and masks use special tools to wipe fastener holes along the top edges of a hollow metal box about the size of a large living-room chair.
Electronics Vault
Engineers at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, prepare for a propellant tank to be inserted into the cylinder in the background at left. The cylinder is one of two that mak...
More
Contamination control engineers in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, evaluate a propellant tank before it is installed in NASA's Europa Clipper spacecraft.
Prepping Europa Clipper's Propulsion Tanks
Europa Clipper’s surface dust analyzer instrument is examined following delivery to JPL in September 2022.
More
An engineer in a full body coverall and a fask mask is shown on the left side of the image, holding a small black flashlight the size of a pen and examining Europa Clipper’s surface dust analyzer instrument. The instrument is gold colored and about the size of a drum, resting on its side. The instrument is resting upon a silver workbench in the cleanroom.
Europa Clipper's Dust Analyzer Delivered to JPL
Engineers install a 2-foot-wide reaction wheel onto the main body of NASA’s Europa Clipper spacecraft at the agency’s Jet Propulsion Laboratory in Southern California.
More
The reaction wheel is seen in the center of this image, shown as a black circulate object two feet wide in width. It’s shown at a slight angle as it is being installed on the spacecraft. Two engineers are seen facing the camera from behind the reaction wheel, and they hold the reaction wheel while it is being installed. The reaction wheel is resting slightly on a small cart with wheels. Above the reaction wheel and the engineers is the body of the spacecraft, which is barely visible.
NASA's Europa Clipper Reaction Wheel in Process
This animation segment shows NASA’s Europa Clipper arriving at the Jovian system. 
More
This animation segment shows NASA’s Europa Clipper arriving at the Jovian system.
Mission Animation: Arrival to Europa
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
More
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
Ultraviolet Spectrograph Delivered to JPL
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
Engineers and technicians in a clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium pressurant onto the propulsion module of NASA’s ...
More
Engineers and technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium onto the propulsion module of NASA's Europa Clipper spacecraft.
Europa Clipper Propulsion Module: Integration Underway
The Europa Clipper Solar Array Mechanical Simulator is shown installed on the spacecraft’s propulsion module.
More
An image showing the Europa Clipper Solar Array Mechanical Simulator installed on the spacecraft’s propulsion module.
Solar Array Mechanical Simulator
The towering core of NASA’s Europa Clipper spacecraft is shown in the storied Spacecraft Assembly Facility at the agency’s Jet Propulsion Laboratory in Southern California.
More
In a large white multistory room, the main body of the Europa Clipper spacecraft rests upon a stand as it takes its position in the ultra-hygienic High Bay 1 in the JPL's Spacecraft Assembly Facility. The main body is composed of a shiny metallic cylinder with wiring and electronics attached to it. Two people in full white coveralls and masks crouch next to the main body. A person in full coveralls and a mask stands in the distance watching. On the right, two additional people in coveralls and masks watch the work being done on the main body of the spacecraft, with one pointing at the main body. In the distance, the cleanroom's wall of fame is visible, with the identifiers of previous missions that have been assembled in the cleanroom.
NASA's Europa Clipper Takes Center Stage
Engineers test a prototype of one of Europa Clipper’s radar antennas in 2018 on a hilltop at NASA’s Jet Propulsion Laboratory. 
More
engineers working on a spacecraft instrument at JPL
Europa Clipper REASON Radar Antenna Test JPL
A close-up view of the top of the inward-facing side of the Europa Clipper vault plate. It's engraved with the Drake Equation, and the Jovian system with a bottle replacing Jupiter. 
More
This is a close-up view of the top of the Europa Clipper's triangular-shaped silver vault plate. It has a rounded top and a flat bottom. This view shows the Drake Equation, and a drawing of the Jovian system with Jupiter replaced with a bottle.
Europa Clipper Vault Plate - Inward Facing Top