Skip Navigation
menu close modal

All Resources

Inspecting Europa Clipper's RF Panel

An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
Source: Johns Hopkins APL
Published: March 4, 2022

An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper in a cleanroom at the Johns Hopkins Applied Physics Laboratory in Laurel, Maryland.

ENLARGE

Related

A 3D model of the Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON), a radar & gravity instrument on Europa Clipper. 
More
3D model of REASON instrument
REASON
The Europa Clipper radio frequency (RF) panel is mechanically installed near the top of the propulsion module cylinders. 
More
Image showing the radio frequency module installed on the top of the spacecraft's propulsion module.
Radio Frequency Module Integration
Jupiter's moon Europa, as seen in this image taken June 27, 1996 by NASA's Galileo spacecraft, displays features in some areas resembling ice floes seen in Earth's polar seas. 
More
cracked, icy surface in black and white
Europa's Broken Ice
Ridges disrupted by the localized formation of domes may be indicative of thermal upwelling of water from beneath Europa's crust.
More
Rugged terrain on Europa.
Dome-Shaped Features on Europa
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
This animation shows a boom expanding from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Close)
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
More
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
High-Gain Antenna Communications Dish
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
This close-up view of the icy surface of Europa, a moon of Jupiter, was obtained on Dec. 20, 1996, by the Solid State Imaging system on board the Galileo spacecraft during its fourth orbit around J...
More
black and white view of terrain on an icy surface
Close-up of Europa's Surface
This color image of the Jovian moon Europa was acquired by Voyager 2 during its close encounter on Monday morning, July 9, 1979. 
More
color view of cracked, icy surface
Europa During Voyager 2 Closest Approach
This mosaic of a region in the northern hemisphere of Jupiter's moon, Europa, displays many of the features which are typical on the satellite's icy surface.
More
color view of ridges and other terrain on an icy surface
Double Ridges, Dark Spots, and Smooth Icy Plains on Europa
When it launches in October, NASA's Europa Clipper will carry a richly layered dispatch that includes more than 2.6 million names submitted by the public.
More
Video explaining Europa Clipper's special vault plate design.
NASA's Design for Message Heading to Jupiter's Moon Europa
A 3D model of the Vault Plate.
More
A 3D model of the Vault Plate.
Vault Plate Info Panel
Everywhere there’s water on Earth, there’s life. Does that hold true elsewhere in our solar system?
More
Video describing the science of the Europa Clipper mission.
Why Does NASA Want to Explore Jupiter's Ocean Moon?
Technicians at NASA’s Kennedy Space Center in Florida prepare to rotate Europa Clipper to a vertical position on May 28, 2024, as part of prelaunch processing. 
More
Workers in blue overalls and white head covers watch as equipment is used to rotate Europa Clipper.
Europa Clipper Spacecraft Rotate to Vertical, Lift and Mate to Work Stand
All four of the reaction wheels installed onto NASA’s Europa Clipper are visible in this photo, which was shot from underneath the main body of the spacecraft while it was being assembled at the ag...
More
Four reaction wheels are seen here, one in each of the four corners of the image. The reaction wheels are black. In the configuration shown, the wheels are visible from their sides, which allows you to see the wiring and other mechanical equipment attached to the reaction wheels. In the middle of this image you can see a silver triangle, which is base of the main body of the spacecraft. Thick bundles of gold wires extend from the reaction wheels, with green tape holding the bundles into place as the spacecraft continues through assembly.
NASA's Europa Clipper Reaction Wheels Installed
This high resolution image of the icy plains on Europa shows multiple sets of crosscutting ridges.
More
Crisscrossed ridges as seen from above.
Europa Under Stress
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory
Europa Clipper Propulsion Module
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
This image of Europa's surface was obtained by the Solid State Imaging (CCD) system on board NASA's Galileo spacecraft during its fourth orbit of Jupiter, Linear features with bright central stripe...
More
black and white partial view of moon with stripes on the surface
Near-Terminator Image of Europa
Europa Clipper’s mass spectrometer was delivered to JPL in December 2022.
More
A group of eleven engineers wearing full-body white protective clothing stand facing the camera in a cleanroom. All of the engineers are giving a thumbs up hand expression. In the middle of the group of engineers is a large transparent box, approximately five feet tall, two feet wide, and two feet deep. Inside the transparent box is the mass spectrometer. Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure.
Europa Clipper's Mass Spectrometer Delivered to JPL
Europa Clipper’s surface dust analyzer instrument is unboxed following delivery to JPL in September 2022. 
More
Two engineers in full white body coveralls and masks are shown in the center of the image lifting a silver box up from a cart, revealing Europa Clipper’s surface dust analyzer instrument underneath. The engineers and the instrument are seen in a cleanroom. The instrument is surrounded by a semi-transparent protective plastic that is in the shape of the box that was covering it. The gold colored instrument is about the size of a drum.
Europa Clipper's Dust Analyzer Delivered to JPL
Europa Clipper's high-gain antenna is installed on Aug. 14, 2023.
More
Europa Clipper's high gain antenna, which is taller than the nearby workers, is covered in a protective shroud as it sits on a platform at NASA's Jet Propulsion Laboratory.
Powerful Antenna Installed On Europa Clipper
This view of the icy surface of Jupiter's moon, Europa, is a mosaic of two pictures taken by the Solid State Imaging system on board the Galileo spacecraft during a close flyby of Europa on Feb. 20...
More
black and white view of ridges on an icy surface
Mosaic of Europa's Ridges, Craters
This high resolution view of the Conamara Chaos region on Jupiter's icy moon, Europa, reveals craters which range in size from about 98 feet (30 meters) to slightly over a quarter of a mile (over 4...
More
black and white view of craters and other terrain features
Small Craters on Europa
This color composite view combines violet, green, and infrared images of Jupiter's intriguing moon, Europa, for a view of the moon in natural color (left) and in enhanced color designed to bring ou...
More
two color, full-disc views of europa with different colors
Europa Global Views in Natural and Enhanced Colors