Skip Navigation
menu close modal

All Resources

Mission Animation: REASON Deployment

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows the deployment of NASA’s Europa Clipper REASON instrument after launch.

See more animations here.

Related content pages

Related

The bake-out fixture is modified in preparation for the transfer and installation of the harness onto the propulsion module structure. The harness is the cabling that connects all of the electronic...
More
people wearing clean room attire work on the spacecraft's electrical system
Europa Clipper Propulsion Module
Mechanical engineers set up Europa Clipper's Wide Angle Camera outside of a thermal-vacuum chamber.
More
Mechanical engineers set up Europa Clipper's Wide Angle Camera outside of a thermal-vacuum chamber.
Europa Imaging System Wide Angle Camera
When it launches in October, NASA's Europa Clipper will carry a richly layered dispatch that includes more than 2.6 million names submitted by the public.
More
Video explaining Europa Clipper's special vault plate design.
NASA's Design for Message Heading to Jupiter's Moon Europa
This is an image from Europa Clipper’s thermal imager science instrument. The image was taken during the instrument's first-light test.
More
An image from Europa Clipper’s thermal imager science instrument (called E-THEMIS).
Thermal Imager's First Light Image
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
More
A plasma instrument sensor assembly is loaded into a thermal vacuum chamber.
Plasma Instrument Thermal Testing
Europa Clipper’s mass spectrometer is examined following delivery to JPL in December 2022.
More
Europa Clipper’s mass spectrometer takes up the left side of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure. Two engineers are visible on the right side of this image as they look at a laptop while performing tests on the instrument.
Europa Clipper's Mass Spectrometer Delivered to JPL
Could a liquid water ocean beneath the surface of Jupiter's moon Europa have the ingredients to support life? Here's how NASA's mission to Europa would find out.
More
Video about Jupiter's moon Europa
Alien Ocean
Engineers and technicians install a high-gain antenna on NASA's Europa Clipper spacecraft.
More
Workers on a raised platform move the Europa Clipper's high gain antenna, which is covered in aluminum colored protective material.
Europa Clipper's High-Gain Antenna Installed
Europa Clipper’s SUDA instrument, pictured in the clean room, will collect and analyze particles lifted from Europa’s surface by micrometeorites.
More
Europa Clipper’s SUDA instrument, pictured in the clean room, will collect and analyze particles lifted from Europa’s surface by micrometeorites.
SUDA Assembly and Testing
The flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. 
More
Shown is the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. MISE will map the distribution of ices, salts, organics, and the warmest hotspots on Europa. In collaboration with the spacecraft’s other instruments – particularly the visible light cameras and ice-penetrating radar – infrared maps from MISE will help scientists understand Europa’s geologic history, which is one of the key characteristics that will help scientists determine if Europa’s suspected ocean is suitable for life.
MISE Assembly
A 3D model of the SUrface Dust Analyzer (SUDA), a chemical analysis instrument on Europa Clipper.
More
3d model of the suda instrument
SUDA
Engineers and technicians in a clean room at NASA’s Jet Propulsion Laboratory display the thick-walled aluminum vault they helped build for the Europa Clipper spacecraft. The vault will protect the...
More
Engineers and technicians in a clean room at NASA's Jet Propulsion Laboratory in Southern California stand between the thick-walled aluminum vault and its duplicate that they helped build for the agency's Europa Clipper spacecraft.
Complete: Europa Clipper Vault and Its Twin
Europa Clipper's developmental test model sits on a flatbed truck at NASA's Jet Propulsion laboratory on its way to structural testing.
More
A shiny metal cylinder 5 feet (1.5 meters) wide and 16 feet (5 meters) tall stands erect on the flatbed of a truck.
Europa Clipper's Developmental Test Model
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments. 
More
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments.
Mission Animation: Spacecraft 360 with Instruments
An engineer removes protective plastic wrap from Europa Clipper's propulsion module.
More
An engineer removes protective plastic wrap from Europa Clipper's propulsion module in a cleanroom.
Europa Clipper Propulsion Module
This animation showing a flyover of Europa was created using stereo imaging data obtained by NASA's Galileo spacecraft.
More
A 3D black-and-white flyover of Europa's surface.
Ridged Plains Flyover
An engineering model of Europa Clipper’s narrow-angle camera, shown at the Johns Hopkins Applied Physics Laboratory.
More
An engineering model of Europa Clipper’s narrow-angle camera, shown at the Johns Hopkins Applied Physics Laboratory.
Europa Imaging System Narrow Angle Camera
Europa Clipper's propulsion module arrives in its shipping container in the cleanroom receiving bay at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module arrives in its shipping container in the cleanroom
Europa Clipper Propulsion Module
Europa Clipper's propulsion module arrives in a shipping container at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module in its shipping container
Europa Clipper Propulsion Module
In this lab activity, students become materials scientists for a day.
More
NASA's Cassini spacecraft is visible in front of Saturn's moon Enceladus, which is seen as a white, frosty glove with plumes in the lower left of the moon. The space around it has a purple color.
Classroom Activity: Spacecraft Materials and the Chemistry of Space Exploration
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
This animation showing a flyover of the region named Conamara on Europa was created using stereo imaging data obtained by NASA's Galileo spacecraft.
More
A 3D black-and-white flyover of Europa's surface.
Conamara Chaos Flyover
Engineers and technicians move the vault plate into position for installation on NASA's Europa Clipper spacecraft on May 3, 2024.
More
Two technicians in white protective clothing hold the Europa Clipper Vault Plate as they position it for installation on the spacecraft.
Placing the Europa Clipper Vault Plate
Europa Clipper’s plasma instrument was tested in this calibration chamber at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper’s plasma instrument was tested in this calibration chamber at the Johns Hopkins Applied Physics Laboratory.
Preparing NASA's Europa Clipper's Plasma Instrument
A worker kneels beside Europa Clipper’s narrow-angle camera.
More
A worker kneels beside the Europa Clipper’s narrow-angle camera (NAC), which is on a metal platform with rods sticking straight up at the corners of the platform. The worker is covered head-to-toe in white protective clothing called a bunny suit. The worker is wearing a blue head covering, and a bright blue face mask. The NAC is wrapped in silver-colored insulating material, it has a round base about the size of tire. The lens is sticking out at an angle and is laced up inside the insulating material.
Europa Clipper's Narrow-Angle Camera Delivered to JPL