Skip Navigation
menu close modal

Images

Mission Animation: Deployment

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows deployment of NASA’s Europa Clipper spacecraft after launch.

See more animations here.

Related content pages

Related

How was NASA’s Europa Clipper spacecraft packed and shipped from the Jet Propulsion Laboratory in Southern California to Kennedy Space Center in Florida?
More
A video explaining how NASA ships a large spacecraft across the country.
How Do You Deliver a 7,000-Pound Spacecraft?
This animation segment shows the deployment of NASA’s Europa Clipper solar arrays after launch.
More
An animation showing Europa Clipper's solar arrays extend from a folded position on each side of the spacecraft, to be fully extended. When fully extended, the spacecraft is approximately as wide as a basketball court.
Mission Animation: Solar Arrays Deployment
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California after delivery.
More
Image showing engineers inspecting the spacecraft's ultraviolet spectrograph in a cleanroom.
Engineers Inspect Europa Clipper's Ultraviolet Spectrograph
Depicted in this artist's concept against an illustration of a basketball court, Europa Clipper is the largest spacecraft NASA has ever built for a planetary mission.
More
A dark gray model of Europa Clipper hovers above a yellowish orange illustration of a basketball court.
Europa Clipper: NASA's Largest Planetary Spacecraft (Artist's Concept)
A 3D-printed mock-up of optical head and shielding for Europa Clipper’s stellar reference unit (or star tracker) going through contamination control and planetary protection sampling prior to enter...
More
A 3D-printed mock-up of optical head and shielding for Europa Clipper’s stellar reference unit (or star tracker) going through contamination control and planetary protection sampling prior to entering a clean room at NASA’s Jet Propulsion Laboratory.
3D-Printed Star Tracker Mock-Up
Build your own version of Europa Clipper, learning how each part of the spacecraft fits together as you go. 
More
Advanced paper model of Europa Clipper available for download.
Europa Clipper Paper Model (Advanced)
Engineers remove a protective cover from Europa Clipper’s narrow-angle camera.
More
In the center of the image, four technicians are seen lifting off a square, white protective cover from a white container that holds Europa Clipper’s narrow-angle camera. The engineers are wearing white full-body coveralls, including blue face masks. Two are facing away from the camera and two are facing the camera. The two closest to the camera have APL written on the back of the coveralls, which stands for “Applied Physics Lab”. Another worker in a white bunny suit and dark blue hood stands off to the right side of the image. A wall clock is to the right of his head. To the far left of the image, two people in bunny suits are recording the moment: One person is holding a video camera, and the other is holding a smartphone. A toolbox is against a wall on the left side of the room.
Europa Clipper's Narrow-Angle Camera Delivered to JPL
New animation shows how “bands” and “grooves” in the icy surface of Jupiter’s moon Europa could transport subsurface water to the moon’s surface.
More
New animation shows how “bands” and “grooves” in the icy surface of Jupiter’s moon Europa could transport subsurface water to the moon’s surface.
Europa's Ocean Ascending
Europa Clipper’s ultraviolet spectrograph is the first science instrument installed on the spacecraft’s nadir deck.
More
A matte-gray polygonal structure about the size of a coffee table sits on end in a white and gray room, and an electronics box is mounted to the structure’s right side.
Ultraviolet Spectrograph Integration
Meet Dipak Srinivasan, a communications systems engineer for NASA's Europa Clipper spacecraft.
More
Video about an engineer that works on NASA's Europa Clipper spacecraft.
NASA Job: Communications Systems Engineer — Behind the Spacecraft: Europa Clipper
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
This animation segment shows NASA’s Europa Clipper flying by Mars during its Mars gravity assist. 
More
An animations showing the spacecraft flying by Mars during its Mars Gravity Assist, which will further propel the spacecraft toward Jupiter.
Mission Animation: Mars Gravity Assist
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
This video shows a test deployment of Europa Clipper’s high frequency (HF) radar antenna.
More
video of test deployment of Europa Clipper’s high frequency (HF) radar antenna
Europa Clipper REASON HF Radar Antenna Deployment
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern...
More
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. The instrument’s housing and some other components were manufactured in machine shops at JPL, where the instrument is being built and tested. Some of the spacecraft’s other science instruments and hardware are being built and tested at partner institutions around the U.S. and abroad. As with Europa Clipper’s other science instruments, MISE was designed specifically to help determine if Jupiter’s ice-covered moon Europa is habitable.
MISE in Clean Room
An engineer integrates an electronics board onto the ion detector for Europa Clipper’s dust analyzer.
More
A small electronics device, with electronics visible at the top and gold metal around the bottom, is visible on a table. A person wearing white coveralls and light blue gloves is seen holding the device with both hands. Addition equipment is visible on the table surrounding the device, including a silver wire.
Integrating Electronics onto the Ion Detector for Europa Clipper's Dust Analyzer
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
Engineers test one of two high frequency radar antennas for Europa Clipper’s REASON instrument on a hilltop at NASA’s Jet Propulsion Laboratory.
More
Engineers test one of two high frequency radar antennas for Europa Clipper’s REASON instrument on a hilltop at NASA’s Jet Propulsion Laboratory.
REASON HF Radar Antenna
Recently assembled Faraday cup sensors and instrument housings in two configurations.
More
PIMS Faraday Cup Sensors
PIMS Faraday Cup Sensors
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
An animation showing a boom extending from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Distance)
Engineers install a 2-foot-wide reaction wheel onto the main body of NASA’s Europa Clipper spacecraft at the agency’s Jet Propulsion Laboratory in Southern California.
More
The reaction wheel is seen in the center of this image, shown as a black circulate object two feet wide in width. It’s shown at a slight angle as it is being installed on the spacecraft. Two engineers are seen facing the camera from behind the reaction wheel, and they hold the reaction wheel while it is being installed. The reaction wheel is resting slightly on a small cart with wheels. Above the reaction wheel and the engineers is the body of the spacecraft, which is barely visible.
NASA's Europa Clipper Reaction Wheel in Process
This simulation shows possible spectroscopy results of Europa’s water plumes, obtained using the Webb telescope’s NIRSpec instrument.
More
Possible spectroscopy results of Europa’s water plumes
Possible Spectroscopy Results of Europa Using Webb
The nadir deck for NASA's Europa Clipper spacecraft. 
More
Nadir deck shown in clean room.
Europa Clipper's Nadir Deck
The outward-facing side of Europa Clipper's vault plate shows waveforms symbolizing the word 'water' in multiple languages.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Water Words
Deep beneath the crust of Jupiter’s frozen moon Europa lies a massive liquid water ocean. 
More
Video explaining why NASA is sending a mission to Jupiter's icy moon - Europa.
What You Need to Know About Europa