Skip Navigation
menu close modal

Posters, Stickers, & More

Europa Clipper Downloadable 3D Model

A 3D model of Europa Clipper available for download. Updated in January 2022.

Related

An engineer makes an electrical connection to the sensor head for Europa Clipper’s dust analyzer.
More
An engineer in white full-body coveralls, a mask, and light blue gloves is shown attaching a wire to the SUDA sensor head. Only the top of the sensor head is visible, and is seen on the lower right portion of the image. The sensor head is gold in color. In the distance, engineers work on other components in the clean room.
Assembling the Sensor Head for Europa Clipper's Dust Analyzer
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory
Europa Clipper Propulsion Module
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
More
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
High-Gain Antenna Communications Dish
The high gain antenna for the Europa Clipper recently underwent testing.
More
Europa Clipper's large high gain antenna, which is taller than a person and is painted dark black, is hoisted on mechanical supports on a large, multi-story room that has its floor, walls, and ceiling covered in blue foam triangles to avoid interference during testing.
High Gain Antenna Testing
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
An engineer integrates an electronics board onto the ion detector for Europa Clipper’s dust analyzer.
More
A small electronics device, with electronics visible at the top and gold metal around the bottom, is visible on a table. A person wearing white coveralls and light blue gloves is seen holding the device with both hands. Addition equipment is visible on the table surrounding the device, including a silver wire.
Integrating Electronics onto the Ion Detector for Europa Clipper's Dust Analyzer
The team working on the Europa Imaging System narrow angle camera took its “first light” image with the telescope and detector.
More
A test pattern in the shape of an L, with stripes at the bottom that show color filters.
Narrow Angle Camera First Light
The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
More
The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
Europa-UVS Final Configuration
Engineers and technicians carefully lower the tall core of NASA’s Europa Clipper spacecraft during a maneuver to position it in the High Bay 1 clean room of the Spacecraft Assembly Facility at the ...
More
The base of the main body of the Europa Clipper spacecraft is seen in the middle of the image. The main body is large, silver, and shaped like a cylinder, with wiring and electronics attached. Four people are visible surrounding the main body of the spacecraft, wearing full body coveralls and masks. The people are gently guiding the spacecraft into its stand where it will continue to be worked on in the Spacecraft Assembly Facility.
Easy Does It: NASA's Europa Clipper is Lowered into Place
Engineers integrate the avionics vault mass simulator for the Europa Clipper avionics module to the top of the propulsion module.
More
Engineers integrate the avionics vault mass simulator for the Europa Clipper avionics module to the top of the propulsion module.
Avionics Mass Simulator
How was NASA’s Europa Clipper spacecraft packed and shipped from the Jet Propulsion Laboratory in Southern California to Kennedy Space Center in Florida?
More
A video explaining how NASA ships a large spacecraft across the country.
How Do You Deliver a 7,000-Pound Spacecraft?
The imaging spectrometer's scanning mirror and data procesing unit are loaded onto a shipping truck. 
More
Members of Europa Clipper’s imaging spectrometer instrument, called MISE, team at the Johns Hopkins Applied Physics Laboratory place a container loading the instrument’s scanning mirror and data processing unit on a shipping truck. The truck transported the instrument parts to NASA’s Jet Propulsion Laboratory in Pasadena, California, in November 2021.
Imaging Spectrometer Component Shipping
A view of the outward-facing side of the Europa Clipper vault plate.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Outward-Facing Side
 The main body of NASA’s Europa Clipper spacecraft has been delivered to the agency’s Jet Propulsion Laboratory in Southern California, where assembly, test, and launch operations are underway.
More
A time lapse video showing a container arriving to JPL and then being opened to reveal the main body of the spacecraft.
Main Body of NASA's Europa Clipper Spacecraft Arrives at JPL from APL
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
Thermal imager bolted to frame.
More
Instrument bolted to frame used for handling.
Thermal Imager
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
Engineers install 2-foot-wide reaction wheels onto the main body of NASA’s Europa Clipper spacecraft at the agency’s Jet Propulsion Laboratory. The orbiter is in its assembly, test, and launch oper...
More
Two engineers in white body coveralls, gloves, and masks are seen framing the image, with one engineer facing towards the camera on the left and one facing away from the camera on the right. They are seen holding a black, two-foot-wide circular reaction wheel, which is in the center of the image. The engineers are installing the reaction wheel to the main body of the spacecraft, which is visible looming above the engineers and the reaction wheel. To the back right of the reaction wheel that is being installed, another reaction wheel that has already been installed is visible.
NASA's Europa Clipper Gets Its Reaction Wheels
This animation segment shows the fairing separation after NASA’s Europa Clipper spacecraft leaves Earth. 
More
An animation showing the payload fairing, which is the nose cone used to protect a spacecraft payload during launch, separating and revealing the Europa Clipper spacecraft after launch.
Mission Animation: Fairing Separation
Engineers test components for Europa Clipper’s radar instrument.
More
Engineers test components for Europa Clipper’s radar instrument.
Radar Test Time-Lapse
The Propulsion Module Development Test Model lower cylinder section undergoes a static load test in a cleanroom at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland. 
More
The Propulsion Module Development Test Model lower cylinder section undergoes a static load test in a cleanroom at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland.
Propulsion Module Development Test Model
Build your own version of Europa Clipper, learning how each part of the spacecraft fits together as you go. 
More
Simple paper model of Europa Clipper available for download.
Europa Clipper Paper Model
With its solar arrays deployed, Europa Clipper spans more than 100 feet (about 30.5 meters) – about the length of a basketball court. 
More
An illustration shows the scale of the Europa Clipper spacecraft by superimposing it on a standard basketball court. The spacecraft appears to hover over the surface of the court while spectators look on. The spacecraft, with its metallic main body at the center and its two solar array wings stretched out on either side, is about the same length as the court.
Europa Clipper Compared to a Basketall Court
An engineer performs wavefront tests on the optical telescope assembly for the Europa Imaging System narrow angle camera.
More
An engineer performs wavefront tests on the optical telescope assembly for the Europa Imaging System narrow angle camera.
Europa Imaging System Optical Telescope Assembly
This animation segment shows NASA’s Europa Clipper flying by Mars during its Mars gravity assist. 
More
An animations showing the spacecraft flying by Mars during its Mars Gravity Assist, which will further propel the spacecraft toward Jupiter.
Mission Animation: Mars Gravity Assist