Skip Navigation
menu close modal

All Resources

Propulsion Module Fit Check

NASA’s Goddard Space Flight Center (GSFC) engineers align the upper and lower cylinders of Europa Clipper’s propulsion module for a fit check.
Source: NASA/B. Lambert
Published: September 8, 2021

NASA’s Goddard Space Flight Center (GSFC) engineers align the upper and lower cylinders of Europa Clipper’s propulsion module for a fit check.

ENLARGE

Related

The animation reveals how the Europa Clipper spacecraft’s own magnetic sources distort the ambient magnetic field near Europa.
More
animation of the complex magnetic fields of the Europa Clipper spacecraft
Europa Clipper Spacecraft Distortion of the Ambient Magnetic Field
As infrared light enters Europa Clipper’s MISE instrument, mirrors bounce the light into its calcium fluoride (CaF2) lens (flight model shown), which directs the light onto a diffraction grating.
More
As infrared light enters Europa Clipper’s MISE instrument, mirrors bounce the light into its calcium fluoride (CaF2) lens (flight model shown), which directs the light onto a diffraction grating.
MISE Dyson CaF2 Lens
An engineer configures the sensor head for Europa Clipper’s dust analyzer for magnetics testing.  
More
The SUDA sensor head rests upon a table in a clean room. The sensor head is gold in color, shaped slightly like a drum on its side. It is attached a device that lifts the sensor head from the table, and is seen slightly to the ride of center in the image. An engineer wearing white full body coveralls, light blue gloves, glasses, and a mask stands behind the sensor head and the table it is on, looking down at the sensor head. Two additional engineers stand in the distance on either side of the sensor head, both wearing full white body coveralls, masks, and light blue gloves.
Configuring Europa Clipper's Dust Analyzer for Magnetics Testing
Europa Clipper’s 28-foot (8.5-meter) magnetometer boom is deployed at NASA’s Jet Propulsion Laboratory.
More
Seven workers in white lab coats, cleanroom bouffant caps, and blue face masks stand near Europa Clipper’s magnetometer boom after the boom was unfurled. The boom is covered in protective silver-colored material and is supported by several aluminum-colored stands.
The Europa Clipper Magnetometer Boom Deployed
This infrared image of Europa, showing heat radiation from its surface at a wavelength of 27 microns (millionths of a meter), provides the best view yet of Europa's daytime temperatures. 
More
bright colors indicate temperatures on a curved surface
Daytime Temperatures on Europa
The images used for the base of this globe were chosen from coverage supplied by the Galileo solid-state imaging (SSI) camera and Voyager 1 and 2 spacecraft.
More
two hemispheric map projections
Europa Hemispherical Globes
An engineering (non-flight) model of the EIS narrow-angle camera.
More
An engineering (non-flight) model of the EIS narrow-angle camera
Europa Imaging System Narrow Angle Camera
The Europa Clipper Solar Array Mechanical Simulator is shown installed on the spacecraft’s propulsion module.
More
Imaging showing the Europa Clipper Solar Array Mechanical Simulator
Solar Array Mechanical Simulator
A 3D model of Europa Clipper’s Ultraviolet Spectrograph (Europa-UVS), a spectrometry instrument on Europa Clipper.
More
3D model of the europa-uvs instrument
Europa-UVS
This 12-frame mosaic provides the highest resolution view ever obtained of the side of Jupiter's moon Europa that faces the giant planet.
More
full-disc black and white view of moon
Europa's Jupiter-Facing Hemisphere
The imaging spectrometer's scanning mirror and data procesing unit are loaded onto a shipping truck. 
More
Members of Europa Clipper’s imaging spectrometer instrument, called MISE, team at the Johns Hopkins Applied Physics Laboratory place a container loading the instrument’s scanning mirror and data processing unit on a shipping truck. The truck transported the instrument parts to NASA’s Jet Propulsion Laboratory in Pasadena, California, in November 2021.
Imaging Spectrometer Component Shipping
Galileo orbiter near-infrared observations of Europa overlayed on a Voyager map.
More
Small color-enhanced areas on a large black and white map.
Near-Infrared Mapping Coverage of Europa
When it launches in October, NASA's Europa Clipper will carry a richly layered dispatch that includes more than 2.6 million names submitted by the public.
More
Video explaining Europa Clipper's special vault plate design.
NASA's Design for Message Heading to Jupiter's Moon Europa
The outward-facing side of Europa Clipper's vault plate shows waveforms symbolizing the word 'water' in multiple languages.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Water Words
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph. 
More
Adjusting laboratory equipment used to calibrate Europa Clipper’s ultraviolet spectrograph.
Ultraviolet Spectrograph Shipment Preparations
Europa Clipper’s power control and distribution assembly is lowered into the spacecraft’s electronics vault. 
More
In a sterile white room, five people wearing white full-body coveralls, gloves, and masks monitor a metal box about the size of a microwave oven as a crane lowers the box in to a larger hollow metal box about six feet wide.
Power Control and Distribution Assembly Integration
This image of the Jovian moon Europa was taken by Voyager 2 the spacecraft passed within 139,800 miles (225,000 kilometers) on July 9, 1979.
More
cracked, icy surface
Europa's Evening Terminator
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
More
Europa Clipper’s bowl-shaped high-gain antenna faces down in this image.
High-Gain Antenna Communications Dish
How did the team working on NASA’s Europa Clipper spacecraft test whether the spacecraft will work properly in outer space?
More
Video showing Europa Clipper undergoing testing in a special chamber to simulate conditions in space.
Spacecraft Makers: Simulating Space to Test Europa Clipper
Europa Clipper’s mass spectrometer was delivered to JPL in December 2022.
More
A group of eleven engineers wearing full-body white protective clothing stand facing the camera in a cleanroom. All of the engineers are giving a thumbs up hand expression. In the middle of the group of engineers is a large transparent box, approximately five feet tall, two feet wide, and two feet deep. Inside the transparent box is the mass spectrometer. Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure.
Europa Clipper's Mass Spectrometer Delivered to JPL
Technicians offload NASA's Europa Clipper from a U.S. Air Force transport aircraft at Kennedy Space Center on May 23, 2024.
More
The back of a green transport aircraft is open like a giant duck's bill, and the shipping container hold Europa Clipper can be seen sitting inside. A ramp extends from the back of the plane. Workers are giving hand signals as they guide the shipping container off the plane.
Europa Clipper Arrives in Florida
We are on the cusp of exploring what may be the best place in our solar system to look for life beyond Earth.
More
illustrated poster of the Europa Clipper spacecraft silhouetted above Europa with Jupiter in the background
Europa Clipper: Journey to an Ocean World Poster
Join team members from NASA’s Europa Clipper mission behind the scenes in a clean room at NASA’s Jet Propulsion Laboratory to learn about the design of this spacecraft that will visit Europa, an ic...
More
Join team members from NASA’s Europa Clipper mission behind the scenes in a clean room at NASA’s Jet Propulsion Laboratory to learn about the design of this spacecraft that will visit Europa, an icy moon of Jupiter.
Spacecraft Makers: Introducing Europa Clipper
During its twelfth orbit around Jupiter, on Dec. 16, 1997, NASA's Galileo spacecraft made its closest pass of Jupiter's icy moon Europa, soaring 124 miles (200 kilometers) kilometers above the icy ...
More
black and white view of ridges and rough terrain on an icy surface
Highest Resolution Image of Europa
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. 
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface. Credit: NASA/SwRI
Mass Spectrometer Electronics Box