Skip Navigation
menu close modal

Videos

Mission Animation: REASON Deployment

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows the deployment of NASA’s Europa Clipper REASON instrument after launch.

See more animations here.

Related content pages

Related

The Europa Imaging System (EIS) wide-angle-camera team took its “first light” image with the telescope and detector in December 2021.
More
The wide-angle camera team is captured in the instrument's first light test at the Johns Hopkins University Applied Physics Laboratory.
Wide Angle Camera First Light
The imaging spectrometer's scanning mirror and data processing unit are carefully packaged into a specialized shipping container.
More
Members of Europa Clipper’s imaging spectrometer instrument, called MISE, team at the Johns Hopkins Applied Physics Laboratory carefully package the instrument’s scanning mirror and data processing unit into a specialized shipping container.
Imaging Spectrometer's Scanning Mirror and Data Processing Unit Packaging
Engineers and technicians move the vault plate into position for installation on NASA's Europa Clipper spacecraft on May 3, 2024.
More
Two technicians in white protective clothing hold the Europa Clipper Vault Plate as they position it for installation on the spacecraft.
Placing the Europa Clipper Vault Plate
The towering core of NASA’s Europa Clipper spacecraft is shown in the storied Spacecraft Assembly Facility at the agency’s Jet Propulsion Laboratory in Southern California.
More
In a large white multistory room, the main body of the Europa Clipper spacecraft rests upon a stand as it takes its position in the ultra-hygienic High Bay 1 in the JPL's Spacecraft Assembly Facility. The main body is composed of a shiny metallic cylinder with wiring and electronics attached to it. Two people in full white coveralls and masks crouch next to the main body. A person in full coveralls and a mask stands in the distance watching. On the right, two additional people in coveralls and masks watch the work being done on the main body of the spacecraft, with one pointing at the main body. In the distance, the cleanroom's wall of fame is visible, with the identifiers of previous missions that have been assembled in the cleanroom.
NASA's Europa Clipper Takes Center Stage
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
More
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
Inspecting Europa Clipper's RF Panel
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
More
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
Ultraviolet Spectrograph Delivered to JPL
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Engineers Inspect Ultraviolet Spectrograph
Engineers and technicians move the vault plate into position for installation on NASA's Europa Clipper spacecraft on May 3, 2024. 
More
Two workers in white protective clothing hold the triangular-shaped silver-colored vault plate near the Europa Clipper spacecraft.
Europa Clipper Vault Plate Positioned
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
More
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
Standing Tall: Europa Clipper's High-Gain Antenna
The high gain antenna is visible moving into the test area at NASA's Langley Research Center. 
More
The high gain antenna is attached to mechanical supports and then lifted into position in a large room for testing.
High Gain Antenna Testing Time Lapse
A 3D model of the Plasma Instrument for Magnetic Sounding (PIMS), a plasma and magnetic field instrument on Europa Clipper. 
More
3d model of PIMS instrument
PIMS
A test model of the boom that will be used for the magnetometer aboard NASA’s Europa Clipper spacecraft is readied in NASA’s Jet Propulsion Laboratory in Southern California.
More
A test model of the boom that will be used for the magnetometer aboard NASA's Europa Clipper spacecraft is readied in NASA's Jet Propulsion Laboratory in Southern California.
Europa Clipper Magnetometer (ECM) Boom
Engineers test a prototype of one of Europa Clipper’s radar antennas in 2018 on a hilltop at NASA’s Jet Propulsion Laboratory. 
More
engineers working on a spacecraft instrument at JPL
Europa Clipper REASON Radar Antenna Test JPL
Print your own 3D scale model of Europa Clipper!
More
Visual showing 3D model available for download.
Europa Clipper Scale Model - 3D Print
An engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulde...
More
An image showing an engineer prepares the ion detector for integration to the SUrface Dust Analyzer (SUDA) sensor head at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado Boulder. SUDA is extremely sensitive and will be able to detect amino acids in concentrations as low as one part per million within water ice.
Dust Analyzer Ion Detector
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
This animation segment shows NASA’s Europa Clipper arriving at the Jovian system. 
More
This animation segment shows NASA’s Europa Clipper arriving at the Jovian system.
Mission Animation: Arrival to Europa
Europa Clipper rolls into the Payload Hazardous Servicing Facility at Kennedy Space Center on May 23, 2024.
More
Europa Clipper is rolled into the Payload Hazardous Servicing Facility while workers stand nearby.
Europa Clipper Rolls Into KSC's Payload Hazardous Servicing Facility
Europa Clipper’s plasma instrument was tested in this calibration chamber at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper’s plasma instrument was tested in this calibration chamber at the Johns Hopkins Applied Physics Laboratory.
Preparing NASA's Europa Clipper's Plasma Instrument
A 3D model of the Europa Thermal Emission Imaging System (E-THEMIS), an imager on Europa Clipper.
More
3D model of the E-THEMIS instrument
E-THEMIS
 Engineers inspect Europa Clipper’s narrow-angle camera.
More
Two workers are standing beside the Europa Clipper’s narrow-angle camera (NAC), which is on a metal platform with rods sticking straight up at the corners of the platform. The workers are covered head-to-toe in mostly white protective clothing called bunny suits, and they are wearing bright blue face masks. One worker is leaning toward the NAC and pointing to the NAC, which is wrapped in silver-colored insulating material. The NAC has a round base about the size of tire. The lens is sticking out at an angle.
Europa Clipper's Narrow-Angle Camera Delivered to JPL
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
Engineers prepare Europa Clipper's thermal imager for a series of tests in a clean room at NASA's Jet Propulsion Laboratory following the instrument's delivery.
More
Multiple engineers in white coveralls preparing the thermal imager instrument, located on a table in a clean room, for functional testing. One engineer has their hands on the instrument.
Thermal Imager Delivered to JPL
This is an engineering model of Europa Clipper’s wide-angle camera, shown at the Johns Hopkins Applied Physics Laboratory.
More
This is an engineering model of Europa Clipper’s wide-angle camera, shown at the Johns Hopkins Applied Physics Laboratory.
Europa Clipper's Europa Imaging System in the Works
An engineer inspects the test setup of the optical telescope assembly for the Europa Imaging System narrow angle camera. 
More
An engineer inspects the test setup of the optical telescope assembly for the Europa Imaging System narrow angle camera.
Europa Imaging System Optical Telescope Assembly