Skip Navigation
menu close modal

Videos

Mission Animation: ECM Boom Deployment (Distance)

Source: NASA/JPL-Caltech
Published: May 16, 2022

This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.

See more animations here.

Related content pages

Related

When it launches in October, NASA's Europa Clipper will carry a richly layered dispatch that includes more than 2.6 million names submitted by the public.
More
Video explaining Europa Clipper's special vault plate design.
NASA's Design for Message Heading to Jupiter's Moon Europa
The propulsion module harness, installed onto a bake-out fixture, is rolled up to the propulsion module in preparation for transfer and installation. The harness is the cabling that connects all of...
More
people working on the spacecraft in the clean room
Europa Clipper Propulsion Module
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Euro...
More
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) EBox and the spectrometer prior to flight model calibration.
Mass Spectrometer Assembly
An engineer makes an electrical connection to the sensor head for Europa Clipper’s dust analyzer.
More
An engineer in white full-body coveralls, a mask, and light blue gloves is shown attaching a wire to the SUDA sensor head. Only the top of the sensor head is visible, and is seen on the lower right portion of the image. The sensor head is gold in color. In the distance, engineers work on other components in the clean room.
Assembling the Sensor Head for Europa Clipper's Dust Analyzer
The Europa Clipper Solar Array Mechanical Simulator is shown installed on the spacecraft’s propulsion module.
More
An image showing the Europa Clipper Solar Array Mechanical Simulator installed on the spacecraft’s propulsion module.
Solar Array Mechanical Simulator
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
More
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
Thermal Imager's First Light Test
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
A 3D model of the Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON), a radar & gravity instrument on Europa Clipper. 
More
3D model of REASON instrument
REASON
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California
More
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California
Engineers Inspect Ultraviolet Spectrograph
The Europa Clipper radio frequency (RF) panel is mechanically installed near the top of the propulsion module cylinders. 
More
Image showing the radio frequency module installed on the top of the spacecraft's propulsion module.
Radio Frequency Module Integration
Members of the Europa Clipper team work on the spacecraft’s heat redistribution system at Jet Propulsion Laboratory in 2019.
More
Members of the Europa Clipper team work on the spacecraft’s heat redistribution system at Jet Propulsion Laboratory in 2019.
Europa Clipper's Thermal Tubing
Thermal imager test for focus and optical quality.
More
Two engineers at a computer.
Thermal Imager Test
Europa Clipper’s SUDA instrument, pictured in the clean room, will collect and analyze particles lifted from Europa’s surface by micrometeorites.
More
Europa Clipper’s SUDA instrument, pictured in the clean room, will collect and analyze particles lifted from Europa’s surface by micrometeorites.
SUDA Assembly and Testing
New animation shows how “bands” and “grooves” in the icy surface of Jupiter’s moon Europa could transport subsurface water to the moon’s surface.
More
New animation shows how “bands” and “grooves” in the icy surface of Jupiter’s moon Europa could transport subsurface water to the moon’s surface.
Europa's Ocean Ascending
The nadir deck for NASA's Europa Clipper spacecraft. 
More
Nadir deck shown in clean room.
Europa Clipper's Nadir Deck
In this activity, students learn how light and energy are spread throughout space.
More
Large solar panels for NASA's Juno spacecraft are visible in a clean room being deployed, surrounded by engineers in full body coveralls.
Classroom Activity: Inverse Square Law Demo
The Europa Imaging System (EIS) wide-angle-camera team took its “first light” image with the telescope and detector in December 2021.
More
The wide-angle camera team is captured in the instrument's first light test at the Johns Hopkins University Applied Physics Laboratory.
Wide Angle Camera First Light
The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
More
The Europa Ultraviolet Spectrograph (Europa-UVS) flight instrument in early fall 2021, in its final configuration.
Europa-UVS Final Configuration
A worker cleans part of the nadir deck for NASA's Europa Clipper spacecraft.
More
A person wearing a white gown and hairnet uses a small cloth to wipe the surface of a piece of spaceflight hardware about the size and shape of a coffee table.
Europa Clipper's Nadir Deck
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Engineers Inspect Ultraviolet Spectrograph
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing.
More
One of Europa Clipper’s star tracker electronics boxes (the bronze-colored cube at center) sits in a JPL clean room for testing in October 2021. After the spacecraft’s launch in October 2024, the star tracker will autonomously identify stars to determine Europa Clipper’s orientation in space. The device is essential for precisely pointing the spacecraft’s science instruments and communication antennas.
Star Tracker Electronics Box
Engineers and technicians move the vault plate into position for installation on NASA's Europa Clipper spacecraft on May 3, 2024. 
More
Two workers in white protective clothing hold the triangular-shaped silver-colored vault plate near the Europa Clipper spacecraft.
Europa Clipper Vault Plate Positioned
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
More
Engineers inspect Europa Clipper's ultraviolet spectrograph in a cleanroom at NASA's Jet Propulsion Laboratory in Southern California.
Engineers Inspect Ultraviolet Spectrograph
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
More
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
Inspecting Europa Clipper's RF Panel
A 3D model of Europa Clipper’s Ultraviolet Spectrograph (Europa-UVS), a spectrometry instrument on Europa Clipper.
More
3D model of the europa-uvs instrument
Europa-UVS