Skip Navigation
menu close modal

All Resources

Augmented Reality Avionics

Europa Clipper engineers using mixed reality (also known as augment reality, or AR) headsets to examine Europa Clipper’s avionics module assembly.
Source: NASA/JPL-Caltech
Published: January 5, 2022

Europa Clipper engineers using mixed reality (also known as augment reality, or AR) headsets to examine Europa Clipper’s avionics module assembly. The assembly consists of the spacecraft structure, various instruments, and mechanical ground support equipment. The mixed reality headsets look like wraparound sunglasses; unlike virtual reality headsets (which produce an entirely virtual setting), they have transparent lenses that blend the virtual and real worlds together.

ENLARGE

Related

The Europa Clipper spacecraft is about 16 feet (5 meters) in height, and will be the largest spacecraft NASA has ever developed for a planetary mission.
More
An illustration shows the scale of the Europa Clipper spacecraft by showing it next to the silhouettes of two people. The two human figures stand to the left of the spacecraft. The spacecraft, with its metallic main body at the center and its two solar array wings stretched out on either side, is about three times as tall as the human figures.
Europa Clipper and People
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
An animation showing the deployment of a boom from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Close)
We are on the cusp of exploring what may be the best place in our solar system to look for life beyond Earth.
More
illustrated poster of the Europa Clipper spacecraft silhouetted above Europa with Jupiter in the background
Europa Clipper: Journey to an Ocean World Poster
This animation segment shows the fairing separation after NASA’s Europa Clipper spacecraft leaves Earth. 
More
An animation showing the payload fairing, which is the nose cone used to protect a spacecraft payload during launch, separating and revealing the Europa Clipper spacecraft after launch.
Mission Animation: Fairing Separation
This animation shows NASA’s Europa Clipper during a flyby of Europa. 
More
This animation shows NASA’s Europa Clipper during a flyby of Europa.
Mission Animation: Europa Flyby
One of Europa Clipper’s star tracker optical heads in a JPL clean room for testing.
More
One of Europa Clipper’s star tracker optical heads in a JPL clean room for testing in October 2021. After the spacecraft’s launch in October 2024, the star tracker will autonomously identify stars to determine Europa Clipper’s orientation in space. The device is essential for precisely pointing the spacecraft’s science instruments and communication antennas.
Star Tracker Optical Head
Engineers and technicians in a clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium pressurant onto the propulsion module of NASA’s ...
More
Engineers and technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium onto the propulsion module of NASA's Europa Clipper spacecraft.
Europa Clipper Propulsion Module: Integration Underway
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
More
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
Standing Tall: Europa Clipper's High-Gain Antenna
Southwest Research Institute (SwRI) staff collaborate on the calibration of the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) instrument, developed and built at SwRI. 
More
Southwest Research Institute (SwRI) staff collaborate on the calibration of the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) instrument, developed and built at SwRI. Kurt Franke (spectrometer engineering lead) points out a mass peak during the MASPEX flight model first calibration run to, clockwise, Kelly Miller (calibration lead), Greg Miller (spectrometer design lead), and Paul Hoeper (software lead).
Mass Spectrometer Assembly
The animation reveals how the Europa Clipper spacecraft’s own magnetic sources distort the ambient magnetic field near Europa.
More
animation of the complex magnetic fields of the Europa Clipper spacecraft
Europa Clipper Spacecraft Distortion of the Ambient Magnetic Field
All four of the reaction wheels installed onto NASA’s Europa Clipper are visible in this photo, which was shot from underneath the main body of the spacecraft while it was being assembled at the ag...
More
Four reaction wheels are seen here, one in each of the four corners of the image. The reaction wheels are black. In the configuration shown, the wheels are visible from their sides, which allows you to see the wiring and other mechanical equipment attached to the reaction wheels. In the middle of this image you can see a silver triangle, which is base of the main body of the spacecraft. Thick bundles of gold wires extend from the reaction wheels, with green tape holding the bundles into place as the spacecraft continues through assembly.
NASA's Europa Clipper Reaction Wheels Installed
An engineer performs wavefront tests on the optical telescope assembly for the Europa Imaging System narrow angle camera.
More
An engineer performs wavefront tests on the optical telescope assembly for the Europa Imaging System narrow angle camera.
Europa Imaging System Optical Telescope Assembly
An identical copy of Europa Clipper's propulsion module and electronics vault is lowered by crane in a static test tower.
More
NASA/JPL-Caltech
Europa Clipper's Developmental Test Model
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments. 
More
This animation shows a 360 of NASA’s Europa Clipper spacecraft and points out scientific instruments.
Mission Animation: Spacecraft 360 with Instruments
Europa Clipper's propulsion module arrives in a shipping container at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module in its shipping container
Europa Clipper Propulsion Module
Print your own 3D scale model of Europa Clipper!
More
Visual showing 3D model available for download.
Europa Clipper Scale Model - 3D Print
Europa Clipper rolls into the Payload Hazardous Servicing Facility at Kennedy Space Center on May 23, 2024.
More
Europa Clipper is rolled into the Payload Hazardous Servicing Facility while workers stand nearby.
Europa Clipper Rolls Into KSC's Payload Hazardous Servicing Facility
The team working on the Europa Imaging System narrow angle camera took its “first light” image with the telescope and detector.
More
A test pattern in the shape of an L, with stripes at the bottom that show color filters.
Narrow Angle Camera First Light
A 3D-printed mock-up of optical head and shielding for Europa Clipper’s stellar reference unit (or star tracker) going through contamination control and planetary protection sampling prior to enter...
More
A 3D-printed mock-up of optical head and shielding for Europa Clipper’s stellar reference unit (or star tracker) going through contamination control and planetary protection sampling prior to entering a clean room at NASA’s Jet Propulsion Laboratory.
3D-Printed Star Tracker Mock-Up
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
More
Europa Clipper's ultraviolet spectrograph is delivered to NASA's Jet Propulsion Laboratory in Southern California.
Ultraviolet Spectrograph Delivered to JPL
An engineering (non-flight) model of the EIS narrow-angle camera.
More
An engineering (non-flight) model of the EIS narrow-angle camera
Europa Imaging System Narrow Angle Camera
Everywhere there’s water on Earth, there’s life. Does that hold true elsewhere in our solar system?
More
Video describing the science of the Europa Clipper mission.
Why Does NASA Want to Explore Jupiter's Ocean Moon?
Europa Clipper’s mass spectrometer is examined following delivery to JPL in December 2022.
More
Europa Clipper’s mass spectrometer takes up the middle of this image. The instrument consists of a long cylinder, several feet tall and a couple of inches in diameter. It takes the shape of an automobile spark plug, with a series of ridges visible at the top. Copper plating and wires extend from the instrument in multiple areas. The instrument is installed on a supportive structure. Engineers are visible in the background working.
Europa Clipper's Mass Spectrometer Delivered to JPL
The outward-facing side of Europa Clipper's vault plate shows waveforms symbolizing the word 'water' in multiple languages.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Water Words
A view of the outward-facing side of the Europa Clipper vault plate.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Outward-Facing Side