Skip Navigation
menu close modal

All Resources

Workers Deploy the Europa Clipper Magnetometer Boom

Two workers in white lab coats, cleanroom bouffant caps, and blue face masks have their backs to the camera as they unfurl as Europa Clipper’s magnetometer boom. A blue frame that holds the boom can be seen. The boom is supported by several silver-colored stands.
Source: NASA/JPL-Caltech
Published: June 7, 2023

The Europa Clipper team deploys a 28-foot (8.5-meter) boom that will support the spacecraft's magnetometer sensors – key for confirming that an ocean lies beneath the surface of Jupiter's icy moon Europa.

Learn More

ENLARGE

Related

An engineering model of Europa Clipper's MASPEX instrument.
More
An engineering model of Europa Clipper's MASPEX instrument.
MAss Spectrometer for Planetary EXploration/Europa (MASPEX)
Technicians prepare to install the high-gain antenna on NASA’s Europa Clipper at Kennedy Space Center on June 17, 2024.
More
Workers in blue overalls and white head covers guide Europa Clipper's high gain antenna as it's installed on the spacecraft.
Europa Clipper High Gain Antenna Install
Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer.
More
Image showing Southwest Research Institute (SwRI) Staff Engineer Yvette Tyler performs integration and testing on the electronics box for Europa Clipper’s mass spectrometer. The mass spectrometer will analyze gases in Europa’s faint atmosphere and possible plumes. It will study the chemistry of the moon’s suspected subsurface ocean, how ocean and surface exchange material, and how radiation alters compounds on the moon’s surface.
Mass Spectrometer Electronics Box
The outward-facing side of Europa Clipper's vault plate shows waveforms symbolizing the word 'water' in multiple languages.
More
An image of the Europa Clipper vault plate, highlighted from the upper left corner casting shadows that emphasize engraved waveforms emanating from a central point symbolizing the word 'water' in multiple languages. The waveforms present as audio frequency waves. The vault plate is metal silver and the engravings are black, set against a black background.
Europa Clipper Vault Plate - Water Words
Print your own 3D scale model of Europa Clipper!
More
Visual showing 3D model available for download.
Europa Clipper Scale Model - 3D Print
This mosaic of an area just southeast of the multi-ring impact structure called Tyre combines two sets of images.
More
Black and white image of terrain.
Rugged Terrain
This view of Jupiter's icy moon Europa shows a region shaped like a mitten that has a texture similar to the matrix of chaotic terrain, which is seen in medium and high resolution images of numerou...
More
black and white view of depression in an surface
Mitten Shaped Region of Chaotic Terrain on Europa
This animation segment shows the deployment of NASA’s Europa Clipper ECM boom after launch.
More
An animation showing the deployment of a boom from the Europa Clipper spacecraft.
Mission Animation: ECM Boom Deployment (Close)
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory.
More
Europa Clipper's propulsion module sits in the cleanroom at the Johns Hopkins Applied Physics Laboratory
Europa Clipper Propulsion Module
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
More
An engineer inspects the radio frequency (RF) panel of NASA’s Europa Clipper.
Inspecting Europa Clipper's RF Panel
Ridges disrupted by the localized formation of domes may be indicative of thermal upwelling of water from beneath Europa's crust.
More
Rugged terrain on Europa.
Dome-Shaped Features on Europa
A U.S. Air Force transport plane carrying Europa Clipper arrives Kennedy Space Center on May 23, 2024.
More
A green transport airplane carrying Europa Clipper sits on the runway in Florida.
Europa Clipper Transport Plane Arrives in Florida
The high gain antenna for the Europa Clipper recently underwent testing.
More
Europa Clipper's large high gain antenna, which is taller than a person and is painted dark black, is hoisted on mechanical supports on a large, multi-story room that has its floor, walls, and ceiling covered in blue foam triangles to avoid interference during testing.
High Gain Antenna Testing
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
More
The massive high-gain antenna for NASA's Europa Clipper mission is complete.
Standing Tall: Europa Clipper's High-Gain Antenna
Europa Clipper’s dust analyzer shown in a clean room.
More
The gold colored SUDA sensor head is shown resting on a table in a clean room, seen in the center of this image. The cover to the image is shown open in the image, allowing you to see a mesh screen inside the sensor head. A purple light is seen reflecting off part of the sensor head and the table it rests on.
Europa Clipper's Dust Analyzer
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
More
Europa Clipper’s thermal imager is shown here in its protective enclosure, viewing the Tempe Campus of Arizona State University during testing on a rooftop lab.
Thermal Imager's First Light Test
This image of Europa's surface was obtained by the Solid State Imaging (CCD) system on board NASA's Galileo spacecraft during its fourth orbit of Jupiter, Linear features with bright central stripe...
More
black and white partial view of moon with stripes on the surface
Near-Terminator Image of Europa
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern...
More
Engineers and technicians work on the flight model of Europa Clipper’s Mapping Imaging Spectrometer for Europa (MISE) instrument in a cleanroom at NASA’s Jet Propulsion Laboratory (JPL) in Southern California. The instrument’s housing and some other components were manufactured in machine shops at JPL, where the instrument is being built and tested. Some of the spacecraft’s other science instruments and hardware are being built and tested at partner institutions around the U.S. and abroad. As with Europa Clipper’s other science instruments, MISE was designed specifically to help determine if Jupiter’s ice-covered moon Europa is habitable.
MISE in Clean Room
A 3D model of Europa Clipper’s Ultraviolet Spectrograph (Europa-UVS), a spectrometry instrument on Europa Clipper.
More
3D model of the europa-uvs instrument
Europa-UVS
Thera and Thrace are two dark, reddish regions of enigmatic terrain that disrupt the older icy ridged plains on Jupiter's moon Europa.
More
Images of two craters
Thera and Thrace
Engineers work on Europa Clipper's electronics vault.
More
Three engineers wearing full-body coveralls, gloves, and masks use special tools to wipe fastener holes along the top edges of a hollow metal box about the size of a large living-room chair.
Electronics Vault
This image of Europa, an icy satellite of Jupiter about the size of the Earth's Moon, was obtained from a range of 7,415 miles (11,933 kilometers) by the Galileo spacecraft during its fourth orbit ...
More
circular pattern on icy surface
Macula on Europa
Thera and Thrace are two dark, reddish regions of enigmatic terrain that disrupt the older icy ridged plains on Jupiter's moon Europa.
More
color view of two darker regions on an icy terrain
Thera and Thrace on Europa
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Euro...
More
Southwest Research Institute (SwRI)’s Dan Aaron (lead spectrometer technician) is making final adjustments to the electrical connections between the MAss Spectrometer for Planetary EXploration/Europa (MASPEX) EBox and the spectrometer prior to flight model calibration.
Mass Spectrometer Assembly
Solar array “wings” for NASA’s Europa Clipper in the cleanroom of Airbus in Leiden, the Netherlands.
More
The spacecraft’s large solar array wings take up the majority of this image. They are parallel to each other in position and the image is taken at angle, so you can see the solar arrays extended into the background of the image. Each solar array wing consists of five panels connected to each other to form a long solar array wing that is approximately 46.5 feet (14.2 meters) long. Bronze colored lines are visible creating a grid pattern on each panel. Each solar array wing is hoisted several feet above the ground by support structures that attach to each solar array wing panel. The solar array wings are tall with an approximate height of 13.5 feet (4.1 meters). Walking between the solar array wings is an engineer wearing blue protective clothing. The engineer doesn’t even appear to come up to half the height of the solar array wings. The solar array wings are visible in a large white cleanroom, and the area with the wings is cordoned off with a red barrier.
NASA Europa Clipper Solar Arrays Assembly